Page 1 of 14
Ordering the Alpha board
Posted: Tue Jul 31, 2018 11:41 am
by exxos
- top.png (808.93 KiB) Viewed 6202 times
PROJECT SPONSORS ARE
* Michael Keenleyside (Gargoyle)
* Richard Coles (Icky)
* troed (Troed Sangberg)
* Phil Copeland (Forgottenmyname)
* Joshua Kaijankoski (Atarian Computing)
* Jon Whiteside (rubber_jonnie)
* Christian Lüddeckens (chlu600)
* Rob Simmons (kodak80) x2
* Johan Hansson (Realloy)
* David Sives-Rutherford (alienkidmj12)
* Urban Jonsson
* Ken Schafer (poobah)
STORE LINK (pre-ordering is now over)
https://www.exxosforum.co.uk/atari/store2/#0148
Re: Ordering the Alpha board
Posted: Tue Jul 31, 2018 12:09 pm
by Cyprian
I would buy one but I have no electronic skills
Re: Ordering the Alpha board
Posted: Tue Jul 31, 2018 12:11 pm
by Atarian Computing
Do we source components from donors? As in the special chips?
Re: Ordering the Alpha board
Posted: Tue Jul 31, 2018 12:22 pm
by rubber_jonnie
Atarian Computing wrote: ↑Tue Jul 31, 2018 12:11 pm
Do we source components from donors? As in the special chips?
Yeah, you're going to need a donor board of some sort.
Re: Ordering the Alpha board
Posted: Tue Jul 31, 2018 12:24 pm
by Atarian Computing
rubber_jonnie wrote: ↑Tue Jul 31, 2018 12:22 pm
Atarian Computing wrote: ↑Tue Jul 31, 2018 12:11 pm
Do we source components from donors? As in the special chips?
Yeah, pretty sure you're going to need a donor board of some sort.
No worries, got several. And some NOS chips.
Re: Ordering the Alpha board
Posted: Tue Jul 31, 2018 12:32 pm
by rubber_jonnie
Atarian Computing wrote: ↑Tue Jul 31, 2018 12:24 pm
No worries, got several. And some NOS chips.
Likewise. I have one board in particular in mind, which will donate it's body for science
Re: Ordering the Alpha board
Posted: Tue Jul 31, 2018 12:39 pm
by Atarian Computing
exxos wrote: ↑Tue Jul 31, 2018 11:41 am
Snip
Do you have a BOM readily available perhaps?
Re: Ordering the Alpha board
Posted: Tue Jul 31, 2018 12:49 pm
by exxos
I have a BOM, not checked all parts yet, but will upload it at a later date.
Will need a donor ST for man parts such as , MMU, GLUE, Shifter etc, other parts like MFP, 1772, I do stock in my store, but a whole spare donor ST will have all parts.
The circuit isn't identical, example needs a Falcon RAM card (1MB or 4MB), PLCC 68000..
Other parts are generic resistors and capacitors etc which should be easy to obtain from any half decent supplier.
Re: Ordering the Alpha board
Posted: Tue Jul 31, 2018 12:53 pm
by rubber_jonnie
Hmm, so I guess I'm seeing SMD type PLCC sockets on the board?
If so then I'm going to have to get some sort of hot air soldering practise in, since I don't have an oven!!
Re: Ordering the Alpha board
Posted: Tue Jul 31, 2018 1:07 pm
by exxos
rubber_jonnie wrote: ↑Tue Jul 31, 2018 12:53 pm
Hmm, so I guess I'm seeing SMD type PLCC sockets on the board?
???
Normal PLCC sockets (not funky ones either, just normal PLCC sockets).