Yeah, you're right about the 10K one.
But there are two 1K ones on the parts list (RP1 and RP7) but I have only 4K7 and 10K ones in my kit... so do I use 4K7 for RP1 and RP7 as well?
Yeah, you're right about the 10K one.
You need 1K for those.
So out of curiosity the article you wrote on the mega accelerator where you have 10k or 4.7k rp's as a problem and need to be changed to 2.2k. Does that stay the same? What caused your change from 2.2k resisters?
The STF board doesn't suffer from ringing or other issues that other boards do... tests on STFM, STE I tested 4.7K on the STE, and it wasn't 100% stable, so I moved to 2.2K, its what is needed... BUT, I think somewhere around 1.8K the DMA starts to screw up... so 2.2K is a bit "close".
Sounds good to me. I going to stick with the 2.2's on this board because they are working well and there soldered in.
Shouldn't be any difference between 4.7K and 2.2K on my board anyway.. both really need testing out.. cant even remember whats fitted on my board...