RAM Boards

All information relating to the Alpha plus all the WIP threads etc.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

RAM Boards

Post by rubber_jonnie »

FYI I have received two RAM boards kindly donated by Stuart Duncan from Australia.

One is populated, one is not.

I already have one myself, so these will be made available to project people who need them.

If you're part of the project, can you please add your name on here and state if you have a RAM board, so we can determine who hasn't, and then have a fair way to pass them on.

Thanks.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: RAM Boards

Post by PhilC »

Morning RJ,

I'm fitting one of Exxos's mmu kits but if the unpopulated one is up for grabs then I'd be happy to have that.
If it ain't broke, test it to Destruction.
User avatar
Icky
Site Admin
Site Admin
Posts: 3986
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: RAM Boards

Post by Icky »

Hi RJ - thanks for organising this. This is such a great community.

I have one of Exxos' Falcon Memory boards so am good.

I may have a few monitor sockets still left over if anyone on the project is also still interested. I'll have to see how many I have.
troed
Moderator
Moderator
Posts: 908
Joined: Mon Aug 21, 2017 10:27 pm

Re: RAM Boards

Post by troed »

I would like a RAM board.

(and a monitor socket would also be great - I have most of what's needed otherwise without needing to cut up a donor STF completely)
User avatar
exxos
Site Admin
Site Admin
Posts: 23499
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: RAM Boards

Post by exxos »

troed wrote: Tue Sep 04, 2018 12:25 pm (and a monitor socket would also be great - I have most of what's needed otherwise without needing to cut up a donor STF completely)
Monitor sockets should be in with the kits I sent out.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
Icky
Site Admin
Site Admin
Posts: 3986
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: RAM Boards

Post by Icky »

exxos wrote: Tue Sep 04, 2018 12:33 pm
troed wrote: Tue Sep 04, 2018 12:25 pm (and a monitor socket would also be great - I have most of what's needed otherwise without needing to cut up a donor STF completely)
Monitor sockets should be in with the kits I sent out.
Thanks Exxos - that packing looked extreme from your pictures. Only place you can do that was the floor. You did a grand job.

I was mentioning as I wondered if anyone missed or chose not to get a kit from your store and needed a monitor socket. Based on reading the threads I lost track of how many boards there were to how many kits etc :)
User avatar
exxos
Site Admin
Site Admin
Posts: 23499
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: RAM Boards

Post by exxos »

Icky wrote: Tue Sep 04, 2018 12:48 pm I was mentioning as I wondered if anyone missed or chose not to get a kit from your store and needed a monitor socket. Based on reading the threads I lost track of how many boards there were to how many kits etc :)
ah, I only did 10 kits, 8 went to my store. So theres about 5 people without full kits, I didn't really expect all the kits to sell as not everyone was going to be building it up. I do still have some resistors and a few monitor sockets.. but again sorting them out even with left over bits takes time..
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Atarian Computing
Posts: 444
Joined: Tue Aug 22, 2017 4:27 am

Re: RAM Boards

Post by Atarian Computing »

rubber_jonnie wrote: Tue Sep 04, 2018 8:31 am FYI I have received two RAM boards kindly donated by Stuart Duncan from Australia.

One is populated, one is not.

I already have one myself, so these will be made available to project people who need them.

If you're part of the project, can you please add your name on here and state if you have a RAM board, so we can determine who hasn't, and then have a fair way to pass them on.

Thanks.
Hey. No Ram board here. Haven't found one yet. Thanks.
User avatar
Icky
Site Admin
Site Admin
Posts: 3986
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: RAM Boards

Post by Icky »

troed wrote: Tue Sep 04, 2018 12:25 pm (and a monitor socket would also be great - I have most of what's needed otherwise without needing to cut up a donor STF completely)
Troed - PM with your address and I'll send you a monitor socket.
troed
Moderator
Moderator
Posts: 908
Joined: Mon Aug 21, 2017 10:27 pm

Re: RAM Boards

Post by troed »

Icky wrote: Tue Sep 04, 2018 9:21 pm Troed - PM with your address and I'll send you a monitor socket.
Thanks but apparently I'm getting one in the kit from exxos :) I didn't know.
Post Reply

Return to “ALPHA DEVELOPMENT INFO”