Page 1 of 9
exxos build
Posted: Wed Nov 13, 2019 9:23 pm
by exxos
Re: exxos build
Posted: Wed Nov 13, 2019 9:25 pm
by Icky
Nice try Exxos
Re: exxos build
Posted: Wed Nov 13, 2019 9:30 pm
by PhilC
At least the holes line up this time
Re: exxos build
Posted: Wed Nov 13, 2019 9:31 pm
by exxos
Re: exxos build
Posted: Wed Nov 13, 2019 9:41 pm
by Icky
I think you need a blue pcb psu as well to match
Re: exxos build
Posted: Wed Nov 13, 2019 9:41 pm
by exxos
I've spotted the first
The pads are missing from the battery holder.. Don't get why as same lib I used on the RTC modules.. so need to look into that...
- IMG_4712.JPG (341.41 KiB) Viewed 6240 times
EDIT:
OK so the vias are connected, so can solder to those, just be careful of the trace which has had a bit of tin plating on it..
- IMG_4715.JPG (249.5 KiB) Viewed 6230 times
Re: exxos build
Posted: Wed Nov 13, 2019 9:43 pm
by keli
Icky wrote: ↑Wed Nov 13, 2019 9:41 pm
I think you need a blue pcb psu as well to match
I think the colour scheme has a nice UK feel to it...
Re: exxos build
Posted: Wed Nov 13, 2019 9:43 pm
by exxos
Icky wrote: ↑Wed Nov 13, 2019 9:41 pm
I think you need a blue pcb psu as well to match
- IMG_4713.JPG (372.67 KiB) Viewed 6238 times
Re: exxos build
Posted: Wed Nov 13, 2019 10:47 pm
by stephen_usher
keli wrote: ↑Wed Nov 13, 2019 9:43 pm
Icky wrote: ↑Wed Nov 13, 2019 9:41 pm
I think you need a blue pcb psu as well to match
I think the colour scheme has a nice UK feel to it...
Ah, looks more like an EU flag to me... *runs away*
Re: exxos build
Posted: Tue Dec 31, 2019 2:46 pm
by PaulJ
@exxos , out of curiosity when is your board scheduled to arrive?
I guess they build it and throw it over the wall?