exxos's Atari, Amiga & retro forum

Hi All,

I'm just building an 030 Pak86/3 but havent been able to locate the patched TOS Rom, does anyone know where I might locate this? Apparently its 3.06 patched for the PAK.

RJ was collecting this stuff, but AFAIK there isn't any 030 stuff... might be worth a look though...

https://www.exxosforum.co.uk/forum/viewt ... f=38&t=635

That was the Pak020 stuff, already got one of them, wanted an 030 to play with

Good luck with that, i wasn't even able to find the schematics...

Maeke wrote: ↑Fri Nov 16, 2018 9:24 pm Good luck with that, i wasn't even able to find the schematics...

You can find most of it here:

http://www.wrsonline.de/pak3.html

I've already looked several times into this site, for nothing, those aren't the schematics of the pak68/3, only the layout.

Umm, I've got the files needed to burn your own TOS v3.06 ROMs adapted for the
Pak 68/3 board. Holger Zimmerman was kind enough to do an English version for
me.

HTHs.
Here are the files for the chips on the board itself.
This is my board, installed in my STacy. Note it is actually running at 40mhz, not the 32mhz
oscillator chip shown.

Thanks Darklord, got some Roms to burn this weekend then see what happens

You are most welcome.

Love to see more Pak boards in play - they are really
well engineered.

Hi Darklord,

I don't suppose you have a schematic for this version of the Pak do you? Mine's not working so far but think it's a problem with my Atari, just wanted to rule it out.