Project: HDMI/DVI out for STFM

[Icky]

Well with our boards being assembled still under lockdown in the factory I thought I would have a go at building one up. This is just after cleaning up some solder bridges. It now needs a clean and then check out that there are no shorts. Then to blast the firmware on and see if it works.

IMG_5063.jpeg (275.62 KiB) Viewed 3746 times

[PhilC]

[Icky]

With a few DIL sockets to make a tower (we like towers) I can test the board out on my 1st H4 which has the ST Monitor socket underneath.

It actually sits perfectly above the shielding. Firmware is in, HDMI is connecting (i.e. seeing some sort of signal) but black screen. Need to do a bit of debugging.

IMG_5064 (1).jpeg (175.94 KiB) Viewed 3770 times

[exxos]

Looks like it was made to fit

[PaulJ]

Could be a stacking award here.

[Icky]

Working with @Smonson this morning we have a test signal out of the HDMI board.

IMG_5068.jpeg (53.09 KiB) Viewed 4006 times

[troed]

Vertical raster demo!

[exxos]

Needs more shades of pink!

[Icky]

No need for shades of pink @exxos. How about shades of green.

IMG_5070.jpeg (105.41 KiB) Viewed 3986 times

My H4 is starting to look good with all its add-ons. Flashy Clock V6 at the bottom, HDMI Shifter at the top above the original monitor socket. Just need to add the SEC Booster

IMG_5069.jpeg (225.21 KiB) Viewed 3986 times

[exxos]

No need for shades of pink @exxos. How about shades of green.

My H4 is starting to look good with all its add-ons. Flashy Clock V6 at the bottom, HDMI Shifter at the top above the original monitor socket. Just need to add the SEC Booster

Yeah yeah, well I been busy doing flashy for ages along with 50 other things I thought you had one anyway ? Or was it PhilC who had one.. I forget...

Anyway, great stuff to see it all coming together!