Also, if you're intending to use TOS 2.06, I believe you must use the ROM socket on the IDE adapter in order to take advantage of the decode it needs.
If you don't have a ROM in the IDE adapter, and are using the original ROM slots, then you will need to boot using a floppy that has hard disk drivers on it.
TOS 1.04 doesn't boot from IDE without a patch, which I uploaded earlier in this post.
But as exxos said, you can either use one ROM or the other, but not both.
EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION
- rubber_jonnie
- Site Admin
- Posts: 10640
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
- Posts: 56
- Joined: Tue Sep 01, 2020 7:18 pm
Re: EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION
so if i remove the rom from the board it could fire up the machine just for testing, as i will need to fit sockets for a 6 rom 1.04 and caps, then once i have it working i can sort out the dual rom as i really only want the 1.04 roms in the system
Re: EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION
The controller tested for me on ST, MST and how I used the PLCC-DIP adapter worked on STE.
And so, if we want to use DUALTOS in IDE EXXOS, it has to be removed TOS from the disc, otherwise it will not work 100%.
If we want to have TOS 1.04 installed on the disc, it will work, but this TOS must have a patch.
And don't forget to connect the IDE to ACSI10.
And so, if we want to use DUALTOS in IDE EXXOS, it has to be removed TOS from the disc, otherwise it will not work 100%.
If we want to have TOS 1.04 installed on the disc, it will work, but this TOS must have a patch.
And don't forget to connect the IDE to ACSI10.
Re: EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION
ASCI. wire is to allow TOS206 to auto boot from IDE... TOS 1.4 cannot boot from IDE... In that case you have to load driver from floppy everytime...
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
- frank.lukas
- Posts: 664
- Joined: Fri Jan 19, 2018 11:52 am
Re: EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION
@czietz did patch TOS 1.04 to boot from IDE too ...
https://github.com/czietz/ideboot/archive/master.zip
https://github.com/czietz/ideboot/
https://github.com/czietz/ideboot/archive/master.zip
https://github.com/czietz/ideboot/
Re: EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION
I did 104/206 for IDE V1.1 R1.C. Where TOS 104 has the IDE autoboot patch.
Works great !!
Works great !!
- rubber_jonnie
- Site Admin
- Posts: 10640
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION
All of my dual boot 1.04\2.06 ROMs have the 1.04 patch from @czietz for IDE boot, works brilliantly.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
- Posts: 56
- Joined: Tue Sep 01, 2020 7:18 pm
Re: EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION
is there a download of the patched 1.04 roms to work with the ide as i have the stfm i would need the extra logic to have 2.06 on the system and i will do that once i have a working system to start with
Re: EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION
You do know the IDE board decodes TOS206 ?thecaver99 wrote: ↑Fri Feb 12, 2021 11:46 am i have the stfm i would need the extra logic to have 2.06 on the system and i will do that once i have a working system to start with
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
- rubber_jonnie
- Site Admin
- Posts: 10640
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION
Although you get the 2.06 decode with the interface, there is a patched 1.04 version I uploaded in the ROMs section which will boot to IDE.thecaver99 wrote: ↑Fri Feb 12, 2021 11:46 am is there a download of the patched 1.04 roms to work with the ide as i have the stfm i would need the extra logic to have 2.06 on the system and i will do that once i have a working system to start with
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...