Page 5 of 5

Re: EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION

Posted: Wed Sep 23, 2020 5:00 pm
by GadgetUK164
Nice work =D Looks really cool! If I stacked the 16Mhz CPU mod on this, would it work? (assuming it would still fit under the keyboard)

Re: EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION

Posted: Wed Sep 23, 2020 6:45 pm
by thecaver99
i have connected both wires and if i have id check on it failes to read but un check id and it reads fine now

Re: EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION

Posted: Thu Sep 24, 2020 4:17 pm
by thecaver99
i've nearly finished building the adapter just have to get 2 68000 sockets but now looking at the st does one have to cut the long plastic pilaer to make it fit aas cant see any other way for it to go in.
i was looking at one of the amiga 500 cpu re-locators as it would shift the cpu over and may clear the pillar.