Boot From SCSI2SD

General hardware issues and troubleshooting etc

Moderators: terriblefire, Terriblefire Moderator

Posts: 60
Joined: Sat Oct 10, 2020 11:25 pm

Re: Boot From SCSI2SD

Post by GianDO » Wed Dec 16, 2020 10:03 pm

GadgetUK164 wrote:
Sun Dec 13, 2020 11:19 am
There you go! If it works with the GVP, it's the SCSI controller. You could try toggling the other options on and off for the SCSI2SD (eg. SCSI 2 support / respond to short SCSI selection pulses, disable glitch filter etc. ie. Try with them flipped on or off vs what you tried already.

I have tried all the options. The point is that it only happens with KS 3.1, while with KS 1.3 it works smoothly.
A2000 - MC68000 - KS3.1 - WB 3.1 - 2MB ChipRAM - Impact A2000-HC+8 Series II - 8 MB FastRAM - SD2SCSI 16GB - Indivision ECS

Post Reply