68020 28mhz, FPU, 9,5mb ram, IDE, RTC and clock port.
Supports CD-drive just fine.
It was designed and produced in poland.
30T accelerator for a CDTV
Moderators: terriblefire, Terriblefire Moderator
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: 30T accelerator for a CDTV
That's interesting.. Did You got one?
Can You tell us more?
Can You tell us more?
Retro computer hardware & repair in Germany
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: 30T accelerator for a CDTV
Yeah if you can keep the ram in the ZII area you will have no issues. 9.5mb of ram... I guess I have got too used to 128mb now
EDIT: didn’t mean that to sound negative. This board looks good
EDIT: didn’t mean that to sound negative. This board looks good
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: 30T accelerator for a CDTV
I guess this card is on its limit with 8MB Fast and 1.5MB Slow RAM because of the EC CPU Type, it can't address more than 16MB in total...
This is ok though since CDTV doesn't have any Zorro slot..
This is ok though since CDTV doesn't have any Zorro slot..
Retro computer hardware & repair in Germany
-
- Posts: 290
- Joined: Thu Feb 28, 2019 5:02 pm
Re: 30T accelerator for a CDTV
This is interesting!
Any links to the sellers website?
Any links to the sellers website?
Re: 30T accelerator for a CDTV
There is no "seller web page", these are available through Polish web site allegro time to time. I got hinted, registered there and bought one.
Ram is 8mb + 1,5mb slow fast area.
It comes with tool wich syncs card's rtc to CDTV's rtc, have kickstart to fast ram, disable fast ram options etc.
With that shape / size it fits perfectly inside of CDTV, without any tinkering.
Requires extended roms v 2.30 to work with CD-drive.
I'm going to use it with 7-bit clock port to SPI apdapter for a networking.
Ram is 8mb + 1,5mb slow fast area.
It comes with tool wich syncs card's rtc to CDTV's rtc, have kickstart to fast ram, disable fast ram options etc.
With that shape / size it fits perfectly inside of CDTV, without any tinkering.
Requires extended roms v 2.30 to work with CD-drive.
I'm going to use it with 7-bit clock port to SPI apdapter for a networking.