30T accelerator for a CDTV

General hardware issues and troubleshooting etc

Moderators: terriblefire, Terriblefire Moderator

Post Reply
utri007
Posts: 161
Joined: Tue Nov 13, 2018 10:20 pm

30T accelerator for a CDTV

Post by utri007 »

68020 28mhz, FPU, 9,5mb ram, IDE, RTC and clock port.

Supports CD-drive just fine.

It was designed and produced in poland.

30t_accelerator.jpg
30t_accelerator.jpg (324.13 KiB) Viewed 3667 times
CDTV_30T_accelerator.jpg
CDTV_30T_accelerator.jpg (366.62 KiB) Viewed 3667 times
User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: 30T accelerator for a CDTV

Post by 8 Bit Dreams »

That's interesting.. Did You got one?
Can You tell us more?
Retro computer hardware & repair in Germany
terriblefire
Moderator Team
Moderator Team
Posts: 5362
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: 30T accelerator for a CDTV

Post by terriblefire »

Yeah if you can keep the ram in the ZII area you will have no issues. 9.5mb of ram... I guess I have got too used to 128mb now

EDIT: didn’t mean that to sound negative. This board looks good
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: 30T accelerator for a CDTV

Post by 8 Bit Dreams »

I guess this card is on its limit with 8MB Fast and 1.5MB Slow RAM because of the EC CPU Type, it can't address more than 16MB in total... 🤔
This is ok though since CDTV doesn't have any Zorro slot..
Retro computer hardware & repair in Germany
Maximilian
Posts: 290
Joined: Thu Feb 28, 2019 5:02 pm

Re: 30T accelerator for a CDTV

Post by Maximilian »

This is interesting!
Any links to the sellers website?
utri007
Posts: 161
Joined: Tue Nov 13, 2018 10:20 pm

Re: 30T accelerator for a CDTV

Post by utri007 »

There is no "seller web page", these are available through Polish web site allegro time to time. I got hinted, registered there and bought one.

Ram is 8mb + 1,5mb slow fast area.

It comes with tool wich syncs card's rtc to CDTV's rtc, have kickstart to fast ram, disable fast ram options etc.
With that shape / size it fits perfectly inside of CDTV, without any tinkering.

Requires extended roms v 2.30 to work with CD-drive.

I'm going to use it with 7-bit clock port to SPI apdapter for a networking.
Post Reply

Return to “AMIGA HARDWARE HELP”