Hi TF,
Maybe the locator will help ,see the link on there site : http://www.amigawiki.org/loc/locator8a5 ... all+-&ws=1
Have a look
Neil's A500++ build
Moderators: terriblefire, Terriblefire Moderator
Re: Neil's A500++ build
Yeah where there were more than I could fit in the customer number field I just referenced the community bom
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Neil's A500++ build
Sure but im not measuring every part before install it.. thats idiotic.Justme14 wrote: ↑Wed Jun 24, 2020 12:23 pm Hi TF,
Maybe the locator will help ,see the link on there site : http://www.amigawiki.org/loc/locator8a5 ... all+-&ws=1
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Neil's A500++ build
You know mouser just truncates it right? so if you fill the field you'll at least get a head start.
EDIT: I just used the community BOM and trimmed out things i didnt need .
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."