H5 B1 FIXES
Re: H5 B1 FIXES
Yep. As said above, there are a few fixes for rev A3. Rev B1 other than the missing hole, I don't know or have found anything else which needs fixing yet.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
-
- Posts: 22
- Joined: Sun Jul 22, 2018 9:42 pm
Re: H5 B1 FIXES
@DoG @exxos Thanks fellas. Have a pile of components and patiently waiting for a time when I have the nerve built up and the house will be quiet/empty to start. Only part that has me really nervous is any SMD work... the through hole parts only has me slightly nervous.
Atari 1040 STFM, Atari Mega ST2, Atari STE (4mb), Atari Mega STE (4mb), Atari Falcon 030, Amiga 2000 V2+, Amiga 2000 Video Toaster GVP030, Amiga 500, Amiga 500+ 030, Amiga 1200 030, MiST
- AndresPlazaR
- Posts: 113
- Joined: Wed Apr 03, 2019 3:35 pm
- Location: Boston, MA, USA
- Contact:
Re: H5 B1 FIXES
I'm also not very good at soldering SMDs. I was successful this time using a soldering iron (no heat gun) with a very fine tip, and Kapton tape to hold the component. Also, those are the first things I soldered in the board, so I could have plenty of space to go around, in different angles, with the iron.officer960 wrote: ↑Sat Dec 12, 2020 5:07 pm @DoG @exxos Thanks fellas. Have a pile of components and patiently waiting for a time when I have the nerve built up and the house will be quiet/empty to start. Only part that has me really nervous is any SMD work... the through hole parts only has me slightly nervous.
--
Andres Plaza R.
Twitter: @AndresPlazaR
Andres Plaza R.
Twitter: @AndresPlazaR