Thanks all - I have just cleaned it up and the board seems fine underneath.
Another interesting one as it must of been quite a hot PSU is that as I was recapping this afternoon under some the caps it was black where the bottom of the caps had left a mark.
As you guys have mentioned it has probably just been left on for long periods - this is prior to me getting my hands on it. If I remember back to the days I had my first STFM I used to play it almost 24/7.
ASP34-2 - Looking a bit burnt
Re: ASP34-2 - Looking a bit burnt
I have finally got round to sorting out this PSU.
Its taken 4 months to finish it off. The PSU has been cleaned up, recapped, refilmed and a new switch fitted.
As you can see in particular the second resistor on the left is pretty burnt
Below is a pic of the finished PSU (Before pic is the first post in this thread)
And finally I have taken a leaf out of Sandord's book https://www.exxosforum.co.uk/forum/viewt ... 49&#p12833 and labelling up the PSU so if someone opens the STE at least they know what's been done to it.
Its taken 4 months to finish it off. The PSU has been cleaned up, recapped, refilmed and a new switch fitted.
As you can see in particular the second resistor on the left is pretty burnt
Below is a pic of the finished PSU (Before pic is the first post in this thread)
And finally I have taken a leaf out of Sandord's book https://www.exxosforum.co.uk/forum/viewt ... 49&#p12833 and labelling up the PSU so if someone opens the STE at least they know what's been done to it.
Re: ASP34-2 - Looking a bit burnt
You do like your pretty labels don't you.
Mine just has "recapped" and a date in my best handwriting
Mine just has "recapped" and a date in my best handwriting
If it ain't broke, test it to Destruction.
Re: ASP34-2 - Looking a bit burnt
- Since I have had the label printer its become a bit of an addiction. I start seeing places all over the place where I can put a label.Forgottenmyname wrote: ↑Sat Mar 23, 2019 11:35 am You do like your pretty labels don't you.
Mine just has "recapped" and a date in my best handwriting
Re: ASP34-2 - Looking a bit burnt
Dawn likes the printer, though we all to lazy to change the spool to print other labels out
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: ASP34-2 - Looking a bit burnt
Adds label printer to the long list of things to buy.
If it ain't broke, test it to Destruction.
Re: ASP34-2 - Looking a bit burnt
Careful it really is addictive. Found myself labelling tubs of food to go in the freezer the other day.Forgottenmyname wrote: ↑Sat Mar 23, 2019 1:30 pm Adds label printer to the long list of things to buy.
Re: ASP34-2 - Looking a bit burnt
Lmao, so far it's been my roms and the component draws with my little brother tape printer but one day I shall be able to print those fancy labels.Icky wrote: ↑Sat Mar 23, 2019 2:58 pmCareful it really is addictive. Found myself labelling tubs of food to go in the freezer the other day.Forgottenmyname wrote: ↑Sat Mar 23, 2019 1:30 pm Adds label printer to the long list of things to buy.
If it ain't broke, test it to Destruction.