Hi all,
I've to replace one cable of the 6 pin psu plug (the remaining cable part is too close to the plug's case to just solder a cable).
Just crimping a new cable to a new connector would be the easiest solutions. Does anyone know what kind of (crimp contact) connector is used inside of the 6 pin plug?
Best regards,
Crimp contact connector in the 6 pin psu plug
-
pixelpusher
- Posts: 117
- Joined: Fri Dec 27, 2019 9:01 pm
-
pixelpusher
- Posts: 117
- Joined: Fri Dec 27, 2019 9:01 pm
Re: Crimp contact connector in the 6 pin psu plug
In case someone is running into the same issue:pixelpusher wrote: ↑Sat May 02, 2020 11:19 pm Hi all,
I've to replace one cable of the 6 pin psu plug (the remaining cable part is too close to the plug's case to just solder a cable).
Just crimping a new cable to a new connector would be the easiest solutions. Does anyone know what kind of (crimp contact) connector is used inside of the 6 pin plug?
Best regards,
It's a TE Connectivity female crimp connector, EI series, part no. 170262-1
Best regards,