Mitsumi SR151 Overheating, almost burning?

Repairs & upgrades.
Tomswork
Posts: 775
Joined: Fri Nov 22, 2019 10:05 pm

Re: Mitsumi SR151 Overheating, almost burning?

Post by Tomswork »

There is a picture I posted at the top of the page. No lead goes from the power supply to the panel led the controler handles those leds. 12volt wire is blue red wire is 5 volts and black is ground on the DC side the red led wire goes to the connector nere the 12v connector

On the ac blue in neutral and brown is hot (L)

Tom
Post Reply

Return to “PSU (power supplies)”