Just to be sure before buying Falcon PSU

Repairs & upgrades.
Steve
Posts: 2569
Joined: Fri Sep 15, 2017 11:49 am

Re: Just to be sure before buying Falcon PSU

Post by Steve »

It's just a custom RCA input/output someone made.... While you're working on it I would just desolder and remove them. Then if you want to you can always solder them back on if you like having RCA... I guess you already have the case holes might as well use them :)
Sinis
Posts: 24
Joined: Sat Nov 06, 2021 11:19 pm

Re: Just to be sure before buying Falcon PSU

Post by Sinis »

Thanks again for your reply @Steve: I will take your advice and remove this, but leave the RCA connectors for now.

I'll probably do it next weekend, as I'm so disappointed with the Falcon's current problems that I need to give it some time. I'll do this at the same time as trying to put the old RTC back on, just to see. Incidentally, it's also because I have to work a bit sometimes :)

Thanks again to all for your help.
Post Reply

Return to “PSU (power supplies)”