Ready built ST536 Atari version. Any Interest?
Re: Ready built TF536 Atari version. Any Interest?
@agranlund thanks for the explanation, I suspect it'll only be the full 030 that I'd supply anyway but its good to see it does boot and run with an EC at least.
If it ain't broke, test it to Destruction.
Re: Ready built TF536 Atari version. Any Interest?
Another four boards available and a fifth one test.
3 x 64mb flashed to Atari firmware £140 each plus postage.
1 x 128mb flashed to Atari 64mb firmware. Please note that at the moment there is no 128mb firmware support but it is on Terriblefire's to do list, so this card will read 64mb presently. This board is £170 plus postage. Price difference due to considerablly higher ram costs. P.s. yes that board does say test more on it. It works but only been tested for two hours so far.
And just a reminder, these boards are tested on a Phoenix H4, some modifications may be required to get these up and running on a regular ST, please be aware of this when purchasing.
3 x 64mb flashed to Atari firmware £140 each plus postage.
1 x 128mb flashed to Atari 64mb firmware. Please note that at the moment there is no 128mb firmware support but it is on Terriblefire's to do list, so this card will read 64mb presently. This board is £170 plus postage. Price difference due to considerablly higher ram costs. P.s. yes that board does say test more on it. It works but only been tested for two hours so far.
And just a reminder, these boards are tested on a Phoenix H4, some modifications may be required to get these up and running on a regular ST, please be aware of this when purchasing.
If it ain't broke, test it to Destruction.
- stephen_usher
- Posts: 5664
- Joined: Mon Nov 13, 2017 7:19 pm
- Location: Oxford, UK.
- Contact:
Re: Ready built TF536 Atari version. Any Interest?
I guess that all of these sold in the end?
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
Re: Ready built TF536 Atari version. Any Interest?
I have a few available still if you're interested.
If it ain't broke, test it to Destruction.
Re: Ready built TF536 Atari version. Any Interest?
I think the following is the latest for these...
https://www.exxosforum.co.uk/forum/viewt ... =11&t=3184
https://www.exxosforum.co.uk/forum/viewt ... =11&t=3184
Re: Ready built TF536 Atari version. Any Interest?
mine TF536 just arrived. Looks so cool.
Thanks @PhilC
will install a cpu socked in my short 520ST
Thanks @PhilC
will install a cpu socked in my short 520ST
Lynx I / Mega ST 1 / 7800 / Portfolio / Lynx II / Jaguar / TT030 / Mega STe / 800 XL / 1040 STe / Falcon030 / 65 XE / 520 STm / SM124 / SC1435
DDD HDD / AT Speed C16 / TF536 / SDrive / PAK68/3 / Lynx Multi Card / LDW Super 2000 / XCA12 / SkunkBoard / CosmosEx / SatanDisk / UltraSatan / USB Floppy Drive Emulator / Eiffel / SIO2PC / Crazy Dots / PAM Net
http://260ste.atari.org
DDD HDD / AT Speed C16 / TF536 / SDrive / PAK68/3 / Lynx Multi Card / LDW Super 2000 / XCA12 / SkunkBoard / CosmosEx / SatanDisk / UltraSatan / USB Floppy Drive Emulator / Eiffel / SIO2PC / Crazy Dots / PAM Net
http://260ste.atari.org
Re: Ready built TF536 Atari version. Any Interest?
Thats cool, good luck with getting the cpu socketed
If it ain't broke, test it to Destruction.
Re: Ready built TF536 Atari version. Any Interest?
@PhilC Hi,
I've finally managed to free up a small (32Meg) CF card ready to go along with the TF536...and have the cable & ID to CF adaptor from exxos too
I plugged it into my Falcon & it's recognised by HDDriver v6 OK (but is empty), so am hoping it will be OK with the TF536 too.
First question is which way round do I plug in the cable? Just had a quick search & can't actually see any photos showing the IDE cable connected (though I'm sure that is just me missing them)...
I'll be booting EmuTOS from floppy & hope to use that to set up the CF card with a few games & utilities...
EDIT - Found a couple of pics with the TF536 with IDE connected in an Amiga...
So I booted EmuTOS from floppy...but have not yet figured out how to get it to see the CF card
I've finally managed to free up a small (32Meg) CF card ready to go along with the TF536...and have the cable & ID to CF adaptor from exxos too
I plugged it into my Falcon & it's recognised by HDDriver v6 OK (but is empty), so am hoping it will be OK with the TF536 too.
First question is which way round do I plug in the cable? Just had a quick search & can't actually see any photos showing the IDE cable connected (though I'm sure that is just me missing them)...
I'll be booting EmuTOS from floppy & hope to use that to set up the CF card with a few games & utilities...
EDIT - Found a couple of pics with the TF536 with IDE connected in an Amiga...
So I booted EmuTOS from floppy...but have not yet figured out how to get it to see the CF card
- stephen_usher
- Posts: 5664
- Joined: Mon Nov 13, 2017 7:19 pm
- Location: Oxford, UK.
- Contact:
Re: Ready built TF536 Atari version. Any Interest?
There's a small dot above one end of the IDE pins. That's the location of pin 1 on the cable.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
Re: Ready built TF536 Atari version. Any Interest?
Ah, thanks...seems to confirm that it's connected properly...but so far, no joy in getting the CF card to be recognised.stephen_usher wrote: ↑Mon Nov 09, 2020 10:41 pm There's a small dot above one end of the IDE pins. That's the location of pin 1 on the cable.