This is the last thing I see on the scope as it freezes...
Again the top yellow wave is ST_DTACK, bottom blue is ST_AS.....As to whether or not this is just coincidence or not I have no idea...
EDIT:
Another shot before it locked up, is where ST_AS is going low when I don't think it should be as DTACK is high the entire time...
EDIT2:
Now the programmer seems to have started being sulky again..
REV 3 - REV 5 - The beginning (ST536)
Re: REV 3 - The beginning
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: REV 3 - The beginning
You know that card worked almost first time out of the gate for me.. and i went Meh... and put it in a drawer for almost a year?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: REV 3 - The beginning
It's the SDRAM module upsetting things somehow, everything else basically works fine.terriblefire wrote: ↑Tue Apr 06, 2021 8:35 pm You know that card worked almost first time out of the gate for me.. and i went Meh... and put it in a drawer for almost a year?
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: REV 3 - The beginning
I have that working on 5 different designs of my boards and another person has the firmware code running perfectly on a completely new amiga motherboard. Do you have all the correct settings from my makefiles set in the fitter and synth? i.e. termination types/speeds etc. otherwise it will not work.exxos wrote: ↑Tue Apr 06, 2021 8:58 pmIts the SDRAM module upsetting things somehow, everything else basically works fine.terriblefire wrote: ↑Tue Apr 06, 2021 8:35 pm You know that card worked almost first time out of the gate for me.. and i went Meh... and put it in a drawer for almost a year?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: REV 3 - The beginning
I checked the settings you sent, pretty much all those are default anyway, I made some changes on the different ones but did not make any difference.terriblefire wrote: ↑Tue Apr 06, 2021 9:25 pm Do you have all the correct settings from my makefiles set in the fitter and synth? i.e. termination types/speeds etc. otherwise it will not work.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: REV 3 - The beginning
Finally looking how things are supposed to be
When high it is either accessing ROM or TTRAM... If it is pulsing low, it is accessing the ST bus.. which is not all that often now
When high it is either accessing ROM or TTRAM... If it is pulsing low, it is accessing the ST bus.. which is not all that often now
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: REV 3 - The beginning
The big ones are keepio, slew rate and termination mode... if its set to KEEPER it will break (long thread here about that)exxos wrote: ↑Tue Apr 06, 2021 9:48 pmI checked the settings you sent, pretty much all those are default anyway, I made some changes on the different ones but did not make any difference.terriblefire wrote: ↑Tue Apr 06, 2021 9:25 pm Do you have all the correct settings from my makefiles set in the fitter and synth? i.e. termination types/speeds etc. otherwise it will not work.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: REV 3 - The beginning
terriblefire wrote: ↑Tue Apr 06, 2021 10:07 pm The big ones are keepio, slew rate and termination mode... if its set to KEEPER it will break (long thread here about that)
EDIT
OH actually its moaning...
Code: Select all
Process "Generate Programming File" completed successfully
WARNING:ProjectMgmt:434 - DesignStrategies: The property Fit:Output Slew Rate cannot be found. Please confirm that the property is specified properly and applies to the target device.
WARNING:ProjectMgmt:462 - StrategyManager: Couldn't find the property instance for Fit:Output Slew Rate.
WARNING:ProjectMgmt:434 - DesignStrategies: The property Fit:I/O Pin Termination cannot be found. Please confirm that the property is specified properly and applies to the target device.
WARNING:ProjectMgmt:462 - StrategyManager: Couldn't find the property instance for Fit:I/O Pin Termination.
WARNING:ProjectMgmt:434 - DesignStrategies: The property Fit:Macrocell Power Setting cannot be found. Please confirm that the property is specified properly and applies to the target device.
WARNING:ProjectMgmt:462 - StrategyManager: Couldn't find the property instance for Fit:Macrocell Power Setting.
WARNING:ProjectMgmt:434 - DesignStrategies: The property Fit:Collapsing Pterm Limit (1-90) cannot be found. Please confirm that the property is specified properly and applies to the target device.
WARNING:ProjectMgmt:462 - StrategyManager: Couldn't find the property instance for Fit:Collapsing Pterm Limit (1-90).
WARNING:ProjectMgmt:434 - DesignStrategies: The property Fit:Output Slew Rate cannot be found. Please confirm that the property is specified properly and applies to the target device.
WARNING:ProjectMgmt:434 - DesignStrategies: The property Fit:I/O Pin Termination cannot be found. Please confirm that the property is specified properly and applies to the target device.
WARNING:ProjectMgmt:434 - DesignStrategies: The property Fit:Macrocell Power Setting cannot be found. Please confirm that the property is specified properly and applies to the target device.
WARNING:ProjectMgmt:434 - DesignStrategies: The property Fit:Collapsing Pterm Limit (1-90) cannot be found. Please confirm that the property is specified properly and applies to the target device.
WARNING:ProjectMgmt:434 - DesignStrategies: The property Fit:Output Slew Rate cannot be found. Please confirm that the property is specified properly and applies to the target device.
WARNING:ProjectMgmt:462 - StrategyManager: Couldn't find the property instance for Fit:Output Slew Rate.
WARNING:ProjectMgmt:434 - DesignStrategies: The property Fit:I/O Pin Termination cannot be found. Please confirm that the property is specified properly and applies to the target device.
WARNING:ProjectMgmt:462 - StrategyManager: Couldn't find the property instance for Fit:I/O Pin Termination.
WARNING:ProjectMgmt:434 - DesignStrategies: The property Fit:Macrocell Power Setting cannot be found. Please confirm that the property is specified properly and applies to the target device.
WARNING:ProjectMgmt:462 - StrategyManager: Couldn't find the property instance for Fit:Macrocell Power Setting.
WARNING:ProjectMgmt:434 - DesignStrategies: The property Fit:Collapsing Pterm Limit (1-90) cannot be found. Please confirm that the property is specified properly and applies to the target device.
WARNING:ProjectMgmt:462 - StrategyManager: Couldn't find the property instance for Fit:Collapsing Pterm Limit (1-90).
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: REV 3 - The beginning
I've never seen that menu... You need to pick in from the left menu otherwise its only implemented strategically when exhaustive fitting
I dont think you're doing what you think you are....
EDIT: I *really* hate the ISE interface..
I dont think you're doing what you think you are....
EDIT: I *really* hate the ISE interface..
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: REV 3 - The beginning
ah its one of those tiny icons near fit... Yeah I hate all these interfaces, why I like the Atmel stuff as its like notepad with a compiler!terriblefire wrote: ↑Tue Apr 06, 2021 10:20 pm I've never seen that menu... You need to pick in from the left menu otherwise its only implemented strategically when exhaustive fitting
I dont think you're doing what you think you are....
EDIT: I *really* hate the ISE interface..
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.