Determined to add internal IDE to my STFM

Problems with your machine in general.
sety
Posts: 64
Joined: Mon Aug 13, 2018 8:47 am

Re: Determined to add internal IDE to my STFM

Post by sety » Sat Nov 10, 2018 1:24 pm

I'm pretty darned happy with what I have so far. :)

Any reason why the GAL needs to be socketed? If I sink it I'll be able to get my RF shields back on. :)
Attachments
ATARIIDE3.JPG
ATARIIDE3.JPG (75.3 KiB) Viewed 938 times

User avatar
PaulJ
Trusted Guru
Trusted Guru
Posts: 689
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: Determined to add internal IDE to my STFM

Post by PaulJ » Sat Nov 10, 2018 3:03 pm

sety wrote:
Sat Nov 10, 2018 9:03 am
Well it worked. I can't believe all this actually worked the first time around. I was sure it was going to take a few reworks.

Now to pluck out all those ROM chips and flash 'em with TOS 206... This is shaping up to be a big job. I'm exhausted.
You can't put 2.06 in a stock 1040. It lives in a different location an you need some decoding for the new location. I'm waiting for Exxos's accelerator that provides the need memory decoding to use 2.06. The board you have may provide it but I don't read German so I assume it doesn't. If you do have a solution for running 2.06 other than a memory load let me know.. :) :) :)

sety
Posts: 64
Joined: Mon Aug 13, 2018 8:47 am

Re: Determined to add internal IDE to my STFM

Post by sety » Sun Nov 11, 2018 1:34 am

frank.lukas wrote:
Sat Nov 10, 2018 11:21 am
You can build two 27C010 Eproms to fit in a 28pin socket. Ask Exxos for guidance to do that. And at a CE wire to the GAL on the IDE Interface Board and ROM2 to the GAL on the IDE Interface Board. See the 1040ST schematics ...
Oh right, I was that tired last night that it didn't click. You're the guy I bought it from. :lol:

I notice that the other version you have includes a TOS 206 option? I don't speak German so I didn't quite understand. What's the difference between the two products?

User avatar
frank.lukas
Posts: 111
Joined: Fri Jan 19, 2018 11:52 am

Re: Determined to add internal IDE to my STFM

Post by frank.lukas » Sun Nov 11, 2018 2:12 pm

With TOS 2.06 Option is the IDE Interface Board plus two 27C010 TOS Eprom Adapter PCBs to put TOS 2.06 in the original 28pin TOS sockets. I can send you the two Adapter PCBs if you want ...

Petari
Trusted Guru
Trusted Guru
Posts: 550
Joined: Tue Nov 28, 2017 1:32 pm

Re: Determined to add internal IDE to my STFM

Post by Petari » Sun Nov 11, 2018 2:34 pm

There are IDE autoboot extensions for older TOS versions available: http://atari.8bitchip.info/astams.php
At bottom of page.
There is 2 kind of people: one thinking about moving to Mars after here becomes too bad, the others thinking about how to keep this planet habitable.

Steve
Posts: 266
Joined: Fri Sep 15, 2017 11:49 am

Re: Determined to add internal IDE to my STFM

Post by Steve » Sun Nov 11, 2018 8:53 pm

I like your old TV station 68k, it looks expensive with that gold lid :)
Falcon ct60e 060 - 256mb ram - phantom bus and dsp accel // Atari TT - Thunder and Storm IDE 64mb ram - Lightning VME - USB LAN - Ati Mach64 2mb // Atari STM 4160 - 4MB ram - 16Mhz exxos 1.5 booster - Ultrasatan

sety
Posts: 64
Joined: Mon Aug 13, 2018 8:47 am

Re: Determined to add internal IDE to my STFM

Post by sety » Mon Nov 12, 2018 6:30 am

Petari wrote:
Sun Nov 11, 2018 2:34 pm
There are IDE autoboot extensions for older TOS versions available: http://atari.8bitchip.info/astams.php
At bottom of page.
Awesome! Thanks! The patches worked.

I'd also be interested in purchasing a copy of your driver. Do I just send you an email?

sety
Posts: 64
Joined: Mon Aug 13, 2018 8:47 am

Re: Determined to add internal IDE to my STFM

Post by sety » Mon Nov 12, 2018 6:32 am

frank.lukas wrote:
Sun Nov 11, 2018 2:12 pm
With TOS 2.06 Option is the IDE Interface Board plus two 27C010 TOS Eprom Adapter PCBs to put TOS 2.06 in the original 28pin TOS sockets. I can send you the two Adapter PCBs if you want ...
Always handy to have :)

How do you wish to proceed? Is PayPal okay?

Petari
Trusted Guru
Trusted Guru
Posts: 550
Joined: Tue Nov 28, 2017 1:32 pm

Re: Determined to add internal IDE to my STFM

Post by Petari » Mon Nov 12, 2018 8:41 am

sety wrote:
Mon Nov 12, 2018 6:30 am
...
I'd also be interested in purchasing a copy of your driver. Do I just send you an email?
Yes, and I will send it via e-mail too.
There is 2 kind of people: one thinking about moving to Mars after here becomes too bad, the others thinking about how to keep this planet habitable.

sety
Posts: 64
Joined: Mon Aug 13, 2018 8:47 am

Re: Determined to add internal IDE to my STFM

Post by sety » Mon Nov 12, 2018 9:58 am

Steve wrote:
Sun Nov 11, 2018 8:53 pm
I like your old TV station 68k, it looks expensive with that gold lid :)
Well it was free, both of them were. :lol:

I wish I had taken more... There was soo much old school stuff there, I almost crapped my pants. It looks like the engineers were well and truly in charge.

What happened is that all the TV networks realised that you can now do a broadcast from a mobile phone and they sacked all the engineers and shut down Television Hill and moved the reporters to nice offices in the city, all four TV stations.

The abandoned studios were the coolest thing I have ever seen. It's all in landfill now and the site is now appartments. :(

This was only last year.

Post Reply