I thought it'd be good to get measurements of the effects of the caps in comparison to a stock STE but things are usually not that simple, are they?
I'm putting the caps in my DAC-fixed STE now so don't worry
I thought it'd be good to get measurements of the effects of the caps in comparison to a stock STE but things are usually not that simple, are they?
First, I see that there's something wrong in my recording path because when I connect the right channel plug to the left channel connector, I get kind of the same result as a disconnected cable.exxos wrote: ↑Mon Nov 12, 2018 9:44 pm No real change then If anything looks worse ? Though that could be as the caps are "high up" on the board...
I think it would be interesting to cover the channel with foil ( insulated with paper first of course ) connected to gnd to screen the audio and see if its picking up interference via RF.. or if its just down to pcb noise...
Looks like big noise spike at 15.2Khz also...
ah ok...