PSU Risers for STF Remake board

The place to discuss & share your 3D models or printable parts!
User avatar
Icky
Moderator
Moderator
Posts: 1194
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: PSU Risers for STF Remake board

Post by Icky » Fri Dec 21, 2018 5:56 pm

Thanks to Forgottenmyname for sending me some printed parts and thanks to R_J for creating them - great work guys :thumbup:

Have fitted to board and they work. A couple of things that have helped and I also still need to do:

I tapped the pillars with thread tap so I could put in screws. The pillar by the MIDI ports needs sanding down slightly as the resistors get in the way of it swinging round into the correct place.

IMG_3433.png
IMG_3433.png (921.77 KiB) Viewed 1171 times
IMG_3434.png
IMG_3434.png (816.14 KiB) Viewed 1171 times
IMG_3435.png
IMG_3435.png (676.72 KiB) Viewed 1171 times

User avatar
PhilC
Trusted Guru
Trusted Guru
Posts: 1517
Joined: Fri Mar 23, 2018 8:22 pm

Re: PSU Risers for STF Remake board

Post by PhilC » Fri Dec 21, 2018 6:00 pm

That actually looks pretty good. Will have to print myself a set now too.
If it ain't broke, test it to Destruction.

User avatar
exxos
Site Admin
Site Admin
Posts: 7118
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: PSU Risers for STF Remake board

Post by exxos » Fri Dec 21, 2018 6:04 pm

:bravo: :goodpost:
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

User avatar
rubber_jonnie
Moderator
Moderator
Posts: 1250
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: PSU Risers for STF Remake board

Post by rubber_jonnie » Sat Dec 22, 2018 9:48 am

Glad to see they worked out well, and good to see them in use :)

I'll actually print myself a set as soon as my new roll of filament arrives.
Collector of old Atari things:
800XL + Ape Warp mod, 2x 1010 cassette, 1050 + Happy mod, 65XE (128k) & XC12, SIO2SD, 2600jr, 7800 and Lynx II
Atari 520ST (1Meg) + Gotek, 1040STFM + Vortex ATOnce + Gotek, 1040STF long button floppy, 4160 STE with Gotek and ROM switcher, 4160STE with 32Mhz booster, ROM switcher and CosmosEx, not to mention various bare ST boards for testing including a PAK 68/2 :)
Plus the rest..
Amiga stuff, Mac stuff, Sinclair stuff etc...
www.electronicnothingness.co.uk

User avatar
exxos
Site Admin
Site Admin
Posts: 7118
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: PSU Risers for STF Remake board

Post by exxos » Sat Dec 22, 2018 11:46 am

So if the top right post was lower down, would the other 3 holes then line up?
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

User avatar
Icky
Moderator
Moderator
Posts: 1194
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: PSU Risers for STF Remake board

Post by Icky » Sat Dec 22, 2018 12:36 pm

exxos wrote:
Sat Dec 22, 2018 11:46 am
So if the top right post was lower down, would the other 3 holes then line up?
Lower down and slightly to the right. However I think they are all out slightly as if you look at the pic here of the bottom of stand-offs.

IMG_3444.png
IMG_3444.png (673.03 KiB) Viewed 1148 times

The right one is slightly shorter in the hole off-set and the angle is ever so slightly different.

I take it you are asking so that you can sort out the holes on the H board? If so I think hardest part is getting these holes correct so that the socket and switch fit nicely when the board is put in an original case. Not an easy line up job.

User avatar
exxos
Site Admin
Site Admin
Posts: 7118
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: PSU Risers for STF Remake board

Post by exxos » Sat Dec 22, 2018 2:30 pm

Icky wrote:
Sat Dec 22, 2018 12:36 pm
I take it you are asking so that you can sort out the holes on the H board? If so I think hardest part is getting these holes correct so that the socket and switch fit nicely when the board is put in an original case. Not an easy line up job.
I've sorted the holes out already.. was just trying to work out if I actually even tried to align the holes up or not.. doesn't matter either way really.

I guess if would help if I had a blank motherboard to check it out with paper properly.
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

Post Reply