V2.5 BOOSTER CURRENT PROTOTYPE STATUS (SEC BOOSTER)

[Icky]

Count me in - I'm mad enough to play around with another board

[PhilC]

Is the Atmel programmer the same as for the atmega328 etc? As I have one of those somewhere

[exxos]

Is the Atmel programmer the same as for the atmega328 etc? As I have one of those somewhere

It needs to program the ATF15xx series..

[PhilC]

Ok, can you not do those with a tl866? They are just a gal equivalent right?

[exxos]

Ok, can you not do those with a tl866? They are just a gal equivalent right?

These chips are like 100pin using JTAG. Totally different programming tech than gals. You have to use the correct jtag programmer by atmel.

[PhilC]

Ok, it's neither of the two i've got as i doubt the Kies one i got will.

[PaulJ]

A eetools chipmax2 will do them. It pretty much does anything...

[rpineau]

The chipmax2 doesn't .. it does the ATF16/20/22Vxx, ATV750/1500/2500 .. but not the ATF15xx which have their proprietary algo. They require a specific programmer , the ATDH1150USB (which as you can imagine only does these and nothing else).
The ATF15xx family : http://ww1.microchip.com/downloads/en/D ... erview.pdf

The ATDH1150USB :
https://www.microchipdirect.com/product/ATDH1150USB
https://www.digikey.com/product-detail/ ... ND/2050869
https://www.mouser.com/ProductDetail/Mi ... UebQ%3D%3D
https://uk.farnell.com/microchip/atdh11 ... dp/2695292#

been there, done that ...

[PhilC]

thats a bit more affrordable, the other was like £424, instread of £50

Can stretch to one of those next month

[PaulJ]

The chipmax2 doesn't .. it does the ATF16/20/22Vxx, ATV750/1500/2500 .. but not the ATF15xx which have their proprietary algo. They require a specific programmer , the ATDH1150USB (which as you can imagine only does these and nothing else).
The ATF15xx family : http://ww1.microchip.com/downloads/en/D ... erview.pdf

The ATDH1150USB :
https://www.microchipdirect.com/product/ATDH1150USB
https://www.digikey.com/product-detail/ ... ND/2050869
https://www.mouser.com/ProductDetail/Mi ... UebQ%3D%3D
https://uk.farnell.com/microchip/atdh11 ... dp/2695292#

been there, done that ...

I beg to differ.. see screen shot of selections. If its listed it programs the device. Never had one that was listed not work. Maybe you have old info or old software?. Not sure if I have the adaptor but that's secondary to the programmer being capable.

IMG_1140.JPG (5 MiB) Viewed 685 times

Excuse the crappy pic but I couldn't find the snipper on windoze and didn't want to waste any time on it. I use it as a hammer and only use it when absolutely necessary,,