Declaring interest in REV G board ( abandoned see REV H1)

[exxos]

Exxos, little surprised here. Just ask this very question in the thread referenced in the html link and to my understanding you said you were restocking the store now prior to job demands occurring later this year and subsequent to the store restock and work demands you wouldn't have any avail time to respin the board this year. Have also become confused by what rev's denote..

See the links to what they were....

Rev G was all the fixes etc .. Again see the link for what that board was..

Though i decided not to produce that board as it wasnt anything different to what the alpha was..

Then loads of stuff was tested in various threads where each tested mod was built into the rev H1.. To many changes to list.. Again see the threads.. There's lots of info on all this.

I think you have missed a lot if what's been going on, I did the bulk of the changes before Xmas... And there won't be a new board even coinsidered until I have caught up on loads of things... And that's also assuming there is even enough interest to even consider continuing it, which is why I'm asking...

The work left is stuff like all the holes and locations of connectors and chips etc....circuit wise its already been mostly completed.. Rev H1 is where we are at..

The DAC board rev 3 I am waiting on people to test, plus myself and icky are working on ide , this is all part of the remake project.. Really work on it has never stopped... But yes I'm busy with my store and other things which will soak up my time for a while... Though icky has helped a great deal with pushing things along, like testing out the new reset circuit,video DAC etc etc but this is old news now...

[kodak80]

Just spoke to a friend who helped me with the first board and he is in for 2 boards as well, so my total is now 4 boards.

[exxos]

Cool.. Will start a new thread with a names list soon to keep track of it all..

Will try and do a proper H1 spec as well as I think its spec has got lost in multiple threads..

[kodak80]

I probably should not ask this but...

Any chance of conponent kits as an option?

[denni505]

Looking good put me down for one board thanks

[exxos]

I've started a new topic for this...

https://www.exxosforum.co.uk/forum/viewt ... =73&t=1634