Filament recommendations
Filament recommendations
Hi All,
can anyone recommend a filament thats a good match to the ST case. Everything I've seen so far is either grey thats too dark or white.
thanks.
can anyone recommend a filament thats a good match to the ST case. Everything I've seen so far is either grey thats too dark or white.
thanks.
If it ain't broke, test it to Destruction.
Re: Filament recommendations
While I don't have an answer (yet) I'm too interested in finding a list of filament that match the ST/STE , Mega ST, MegaSTE and TT (which is not grey).
I did a quick image search on google for "grey ABS filament" but it's hard to gauge even with a screen that is color calibrated. I looked for ABS but PLA would also be ok as long as we can find a color match.
Edit :
Apparently the color for the ST case is RAL 7038, I found some filament with that color but hard to tell :
https://colorfabb.com/pla-700007-agate-grey-ral-7038
Edit 2 :
RAL 7038 is smack between Pantone 413U and 414U ... so only testing will say
I did a quick image search on google for "grey ABS filament" but it's hard to gauge even with a screen that is color calibrated. I looked for ABS but PLA would also be ok as long as we can find a color match.
Edit :
Apparently the color for the ST case is RAL 7038, I found some filament with that color but hard to tell :
https://colorfabb.com/pla-700007-agate-grey-ral-7038
Edit 2 :
RAL 7038 is smack between Pantone 413U and 414U ... so only testing will say
Working ones : MegaSTE (68020) / TT030 / Falcon with AB040 & Eclipse / 1040STF
Need testing : Falcon with CT2
Need testing : Falcon with CT2
Re: Filament recommendations
Thank you. Will see if I can find something in the UK cheaper but with that paint code and see what it prints like.
If it ain't broke, test it to Destruction.
Re: Filament recommendations
Latest update, to get the filament above would end up costing me about £45-£50 specially made, so I am considering printing it with the grey I already have and then painting them.
If it ain't broke, test it to Destruction.
Re: Filament recommendations
Wow, yea... too expensive
Working ones : MegaSTE (68020) / TT030 / Falcon with AB040 & Eclipse / 1040STF
Need testing : Falcon with CT2
Need testing : Falcon with CT2
Re: Filament recommendations
Thanks, that is useful. I will take a panel with me and get it colour matched when I buy the paint.
If it ain't broke, test it to Destruction.
Re: Filament recommendations
Due to surface structure of original case, colors look different on it than on shiny sample. I was painting with glossy paint and it wasn't too shiny, but I thing a better choice would be semi-gloss/satin, especially for painting on 3D printouts. When painting on plastic you have to use plastic primer. I'm positively surprised with the hardness/durability of the paint, I was using Motip/Dupli Color series paints (they specialize in automotive paints).
Re: Filament recommendations
Thanks, will see what I can find. I need to bond the 3d printed parts to a mega case initially, what would you suggest I use as a glue/ filler?
If it ain't broke, test it to Destruction.
Re: Filament recommendations
Superglue works well on ABS printed part. But.. be careful as it act as a solvent for ABS, so it's ok to glue 2 parts together, not so much to fill holes and gaps.
Working ones : MegaSTE (68020) / TT030 / Falcon with AB040 & Eclipse / 1040STF
Need testing : Falcon with CT2
Need testing : Falcon with CT2