
So my initial thought was having this mounted like this.. So the cards are above the sockets at the back...
Though I really didn't like the awkwardness of rear mounting the SD cards...
So the only other place it could possibly go, is underneath the floppy drive..
Ultrasatan Would probably fit under the drive if there was no ICs on the motherboard... Or if they are, not in sockets and strategically placed not to squash up anything large on ultrasatan..
I'm assuming the small black connector to program header for the chip.. As it is pretty tall, it may have to be removed..
Likely a socket could be mounted for power and DMA port.. If it was all done it the right heights, ultrasatan would basically become a pluggable expansion card. Then the CF cards would just need some slots cutting underneath the floppy drive in the case to allow stick out a bit..