Eiffel 3 Conversion of PS/2 sockets to USB Sockets

[exxos]

STOP.HAVING.IDEAS

......

[PhilC]

I just need an Eiffel 3, stuff the ideas.

[Icky]

So no one noticed my faux pas.

I got the GND and VCC arrows the wrong way round in the photo. I'll update the photo shortly.

[PhilC]

Or were we all so used to fitting unf*ck mods that we thought youd get there eventually?

[Icky]

Or were we all so used to fitting unf*ck mods that we thought youd get there eventually?

- At least I spotted it before soldering everything in permanently

[Icky]

OK - original pin to pin photo updated correctly.

Now that I got the pins round the right way its been a lot easier. I can put the USB socket on the top by lifting up the centre pins and soldering them to the board with wires. The rest of the USB socket just goes in as is.

IMG_3692.jpg (115.48 KiB) Viewed 1466 times

[Icky]

And it works

I now have a nice neat USB Eiffel 3 - Now no more thinking today otherwise I'll come up with an idea which will turn into a project.

IMG_3694.jpg (64.08 KiB) Viewed 1466 times

IMG_3693.jpg (227.41 KiB) Viewed 1466 times

[exxos]

Wonder if we should add that to the remake board...

[Icky]

Wonder if we should add that to the remake board...

If its integrated to the Remake then may be headers so that one of these could be used

DELOCK_84839_1.png (596.01 KiB) Viewed 1461 times

[exxos]

If its integrated to the Remake then may be headers so that one of these could be used

cool!