New Board TF536
Moderators: terriblefire, Terriblefire Moderator
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: New Board TF536
The ROM board never arrived.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
- roy-forest-fc.goodall
- Posts: 31
- Joined: Fri Mar 08, 2019 12:06 am
Re: New Board TF536
I would be interested in a board or two when they are ready
Re: New Board TF536
I'm in awe, was hoping for this, but did not expect it to happen anytime soon. You're a beast, great job, again!
-
- Posts: 6
- Joined: Sat May 04, 2019 1:43 pm
Re: New Board TF536
gr8 work board looks spot on , just started 2nd tf 534 board build
Will support by buying some of boards when they you are happy with design.
you did fantastic job on 534 , real str8 forward build
Will support by buying some of boards when they you are happy with design.
you did fantastic job on 534 , real str8 forward build
Re: New Board TF536
Excelent work, this one will be spot on! I was going to build a TF534 but now I'l wait just a bit longer and build this one when available .
Re: New Board TF536
Personally I will be keeping my fingers crossed for the 144 since I have a ton of those left from the unsold 330s but whatever works.terriblefire wrote: ↑Sun May 19, 2019 10:15 pm EDIT: Actually I dont know yet if the CPLD will be the XC95144 or the XC95288... will see how i go when i get to the firmware stage.
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: New Board TF536
The 144 will be tight. Might fit just.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: New Board TF536
Boards are ready to ship...
Will they work?
Will they work?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: New Board TF536
A kludge is a workaround or quick-and-dirty solution that is clumsy, inelegant, inefficient, difficult to extend and hard to maintain.
My lack of focus:
[ 4 * Amiga 500 ][ Amiga 500+ ][ 2 * Amiga 600 ][ A1200 ][ Amiga 2000 w/ A2386 ][ Amiga 4000/030 w/ CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ Mac Classic ][ Mac Classic II ][ Mac Colour Classic ]
My lack of focus:
[ 4 * Amiga 500 ][ Amiga 500+ ][ 2 * Amiga 600 ][ A1200 ][ Amiga 2000 w/ A2386 ][ Amiga 4000/030 w/ CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ Mac Classic ][ Mac Classic II ][ Mac Colour Classic ]
Re: New Board TF536
I would like to reserve a couple if possible, be great to help out with any debugging too.
EDIT: Oh I just realised I am way ahead of myself here, you mean being shipped to you