exxos blog - random goings on

https://www.youtube.com/user/exxosuk · Post by **exxos** » Thu May 23, 2019 1:26 pm

rubber_jonnie wrote: ↑
Thu May 23, 2019 10:00 am
Damn me and my weak will, I just fed Harry again, 2 PSU leads and an IDE interface.....

I am so weak and have no will of my own......

https://www.youtube.com/user/exxosuk · Post by **exxos** » Thu May 23, 2019 2:49 pm

This bunch of crap just turned up... I guess I will have to sort it all out now..

: IMG_4201.JPG (91.64 KiB) Viewed 1286 times

Post by **PhilC** » Thu May 23, 2019 7:01 pm

Nah, just throw it in the pile with all the other long lost boards, never to be seen again

Well, except the VGA adaptor boards, I like them

https://www.youtube.com/user/exxosuk · Post by **exxos** » Thu May 23, 2019 7:05 pm

PhilC wrote: ↑
Thu May 23, 2019 7:01 pm
Nah, just throw it in the pile with all the other long lost boards, never to be seen again

Well, except the VGA adaptor boards, I like them

Yeah.. So many projects all arriving at once again

Post by **PhilC** » Thu May 23, 2019 7:08 pm

exxos wrote: ↑
Thu May 23, 2019 7:05 pm

Yeah.. So many projects all arriving at once again

Lemme know if you need a hand, I ave some time somewhere in between sleeping and going to work..... somewhere.....

https://www.youtube.com/user/exxosuk · Post by **exxos** » Thu May 23, 2019 10:09 pm

rubber_jonnie wrote: ↑
Thu May 23, 2019 9:01 am
Not impressed, the print job stopped about 2 hours in for some reason. At first I thought my print server had rebooted, but no. No logs as to why it stopped either. Need to print it again now

On no.. to many hops and jumps

https://www.youtube.com/user/exxosuk · Post by **exxos** » Fri May 24, 2019 2:53 pm

oooo found me a Virgin F2 TOS104

Oddly the PSG is in a socket, but original solder..

: IMG_4221.JPG (144.2 KiB) Viewed 1248 times

https://www.youtube.com/user/exxosuk · Post by **exxos** » Fri May 24, 2019 3:56 pm

Really need to get me one of these...

: large-3d-printers3.jpg (97.94 KiB) Viewed 1242 times

http://www.modix3d.com/?affcode=g994868 ... gLeWPD_BwE

Post by **PhilC** » Fri May 24, 2019 4:01 pm

Looks nice but between all the motherboards and the cat, you don't have any more floor space!

Bet its expensive too.

Hmmm, doubles up as a heated cat box when not in use. Set the bed temp for say 40oC?

https://www.youtube.com/user/exxosuk · Post by **exxos** » Fri May 24, 2019 8:45 pm

PhilC wrote: ↑
Fri May 24, 2019 4:01 pm
Looks nice but between all the motherboards and the cat, you don't have any more floor space!

That is true. I would seriously have to love a good sort out in order to generate that much room!

PhilC wrote: ↑
Fri May 24, 2019 4:01 pm
Bet its expensive too.

About £3,500, but its overseas, so probably end up double that cost after shipping and import taxes

PhilC wrote: ↑
Fri May 24, 2019 4:01 pm
Hmmm, doubles up as a heated cat box when not in use. Set the bed temp for say 40oC?

Cat doesn't live with me so wouldn't be a problem anyway

But seriously, I would consider saving up and getting one of these printers with the possibility of printing STFM cases etc...

exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on