STFM case remake

The place to discuss & share your 3D models or printable parts!
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: STFM case remake

Post by PhilC »

I've got a couple of Eiffel adaptors, will check it all out and see, thanks Paul.
If it ain't broke, test it to Destruction.
keli
Posts: 97
Joined: Tue Aug 22, 2017 1:34 pm

Re: STFM case remake

Post by keli »

exxos wrote: Wed Jul 17, 2019 9:43 pm
PhilC wrote: Wed Jul 17, 2019 9:40 pm Has anyone ever adapted an internal keyboard for a Mega ST? Don't mind taking this project on if youd both like?
Not sure.. wasn't the mega keyboard the ST keyboard design just with a different connector on it ?
The Mega keyboard feels better, but the signal and protocol is exactly the same as the internal ST one, the connector is just different. They use 4 pins, RX/TX, which is 5V TTL serial interface running at 7812.5 baud, 5V power and finally a ground pin. The ST one has an extra 5th pin for the disk activity LED IIRC.
User avatar
exxos
Site Admin
Site Admin
Posts: 23499
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: STFM case remake

Post by exxos »

keli wrote: Thu Jul 18, 2019 3:27 pm The Mega keyboard feels better, but the signal and protocol is exactly the same as the internal ST one, the connector is just different. They use 4 pins, RX/TX, which is 5V TTL serial interface running at 7812.5 baud, 5V power and finally a ground pin. The ST one has an extra 5th pin for the disk activity LED IIRC.
Cool thanks :)

I'm not a fan of the external keyboards. I don't know if its just mine or they all like it, but they just seem very quirky and don't seem to ever work right to me. I normally use the keys to control the mouse and on the mega its like it doesn't respond to the keys being held down half the time :shrug: .
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: STFM case remake

Post by PhilC »

Thanks Keli
If it ain't broke, test it to Destruction.
User avatar
Icky
Site Admin
Site Admin
Posts: 3986
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: STFM case remake

Post by Icky »

keli wrote: Thu Jul 18, 2019 3:27 pm The Mega keyboard feels better, but the signal and protocol is exactly the same as the internal ST one, the connector is just different. They use 4 pins, RX/TX, which is 5V TTL serial interface running at 7812.5 baud, 5V power and finally a ground pin. The ST one has an extra 5th pin for the disk activity LED IIRC.
The Mega ST keyboard uses Cherry MX Black switches compared to the membrane on the STFM keyboard. AtariComputing did a post on the Mega ST switches https://www.exxosforum.co.uk/forum/viewtopic.php?t=944
User avatar
exxos
Site Admin
Site Admin
Posts: 23499
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: STFM case remake

Post by exxos »

I think there should be a dedicated "thump pad" on top of the STF case, so when it doesn't work, there is a pre-calibrated thump pad to give the thing a whack when it doesn't boot.. That would be a really useful feature to have!
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
frank.lukas
Posts: 660
Joined: Fri Jan 19, 2018 11:52 am

Re: STFM case remake

Post by frank.lukas »

There also a rebuild project -> http://www.gossuin.be/index.php/clavier-atari
User avatar
Icky
Site Admin
Site Admin
Posts: 3986
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: STFM case remake

Post by Icky »

frank.lukas wrote: Sat Jul 20, 2019 3:02 pm There also a rebuild project -> http://www.gossuin.be/index.php/clavier-atari
Thanks Frank. Looks pretty cool.
Lastic
Posts: 5
Joined: Mon Jul 22, 2019 6:07 am
Location: Belgium

Re: STFM case remake

Post by Lastic »

Icky wrote: Sun Jun 09, 2019 11:27 am Third section printed out. This time with struts as there would be no way the cartridge port would print out without them but had a few issues with this print but let it run anyway.

Again its hi-lighted a few areas for improvements in the files.


IMG_4016.jpgIMG_4015.jpg
Good morning,

I'm in the midst of enhancing an Atari 130XE with an Ultimate 1MB expansion , 3.5" internal diskdrive on the righthand side and Midi ports on the lefthand side with an SIO2MIDI as shown here https://ataribits.weebly.com/midi.html

As such I was considering using the ST bottom case Midi ports standoff to insert into my 130XE case.
Since it's a bit of excessive and a shame to use an ST bottom case just for this part, would you mind sharing just this part's 3D model ?
3D printing it is a more cost-effective solution if I could use it. Both me and my 130XE would be eternally gratefull .
User avatar
Icky
Site Admin
Site Admin
Posts: 3986
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: STFM case remake

Post by Icky »

Lastic wrote: Mon Jul 22, 2019 6:15 am Good morning,

I'm in the midst of enhancing an Atari 130XE with an Ultimate 1MB expansion , 3.5" internal diskdrive on the righthand side and Midi ports on the lefthand side with an SIO2MIDI as shown here https://ataribits.weebly.com/midi.html

As such I was considering using the ST bottom case Midi ports standoff to insert into my 130XE case.
Since it's a bit of excessive and a shame to use an ST bottom case just for this part, would you mind sharing just this part's 3D model ?
3D printing it is a more cost-effective solution if I could use it. Both me and my 130XE would be eternally gratefull .
Hi. I am not quite sure what you are trying to do based on your description.

In any case (excuse the pun) we are still working on the 3D files as although the prints look good from a far there are still issues with every section. A lot of effort and investment for the initial scans and time on modifying the issues has been made with these files and currently we are just trying to get the ST case completed.
Post Reply

Return to “3D MODELS”