Another Aussie joins

kodak80 · Post by **kodak80** » Sat Nov 04, 2017 9:15 am

Hi everyone

Based in Brisbane, AU. I have recently aquired a Falcon 030 and have already purchased two new ST power supplies from the Exxos store. I have the capacitors to re-cap the Falcon power supply and the Exxos NVRAM replacement but need to practice my soldering before I attempt to do the Falcon components. I am glad to see Exxos has posted his equipment and tips on soldering. My plan is to try out my soldering skills on some old PC boards first.

Post by **exxos** » Sat Nov 04, 2017 10:11 am

kodak80 wrote: ↑
Sat Nov 04, 2017 9:15 am
Hi everyone

Based in Brisbane, AU. I have recently aquired a Falcon 030 and have already purchased two new ST power supplies from the Exxos store. I have the capacitors to re-cap the Falcon power supply and the Exxos NVRAM replacement but need to practice my soldering before I attempt to do the Falcon components. I am glad to see Exxos has posted his equipment and tips on soldering. My plan is to try out my soldering skills on some old PC boards first.

Let us know how you get on with it all

Steve · Post by **Steve** » Thu Nov 23, 2017 1:06 pm

If you ever need advice or help I am in Adelaide, welcome to the forum.

kodak80 · Post by **kodak80** » Thu Nov 23, 2017 8:13 pm

Thanks Steve. I have purchased a decent soldering iron and my initial work soldering speakers to some Gotek boards went well and alot easier than my previous experiences with a cheap soldering iron. Wish I had purchaed this years ago.