Building a DIY large bed 3D printer
Re: Building a DIY large bed 3D printer
That HR-PLA 3D870 sound very interesting. I sometimes print some astronomy hardware related pieces with ABS (brackets, ..), but may be I should try this new PLA.
Working ones : MegaSTE (68020) / TT030 / Falcon with AB040 & Eclipse / 1040STF
Need testing : Falcon with CT2
Need testing : Falcon with CT2
Re: Building a DIY large bed 3D printer
Started printing the first parts for the printer build. Am currently using the HR-PLA 3D870 filament to see how it performs, so far its printing nice and easy like normal PLA.
Re: Building a DIY large bed 3D printer
I think I need to reconsider where I am going to put this printer. It's going to be a little large.
Re: Building a DIY large bed 3D printer
WANT
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: Building a DIY large bed 3D printer
That's a whole load of pink filament required
If it ain't broke, test it to Destruction.
Re: Building a DIY large bed 3D printer
I can donate that
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: Building a DIY large bed 3D printer
It will be interesting to know exactly how much filament is required for the STFM Case Remake (top and bottom). I think I used during the prototyping prints approximately 80% of a 1Kg reel.
Re: Building a DIY large bed 3D printer
I have at a guess around about 5kg of pink PLA that I dont need (I use it for prototyping) A decent offer gets it
Re: Building a DIY large bed 3D printer
Musing and modding the original parts to make sure this thing is stable and supports the longer X span.
I have extended the front skirt underneath and added two additional feet either side of the LCD screen.
The heat bed is to be supported by four extrusions as opposed to the original 2 which has too much flex on such a large plate.
I have extended the front skirt underneath and added two additional feet either side of the LCD screen.
The heat bed is to be supported by four extrusions as opposed to the original 2 which has too much flex on such a large plate.