TF536 on A500
Moderators: terriblefire, Terriblefire Moderator
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 on A500
There is no ETA.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: TF536 on A500
Nope, this issue was caused by V2 CF to IDE adapters, using SD to IDE with MMULibs gives a good kick in the ass and ide works at 3,7MB/sMethanoid wrote: ↑Tue Sep 17, 2019 2:50 pm
Didn't Mr Leary mention that on one of his YouTube streams and say he still had work to do to fix that in the CPLD (or has my RAM a.k.a. "Really Ancient Memory" finally got corrupted) ??
Is there any ETA for when the board is being finalised so we might see people assembling and selling these for people who don't have the skills or eyesight for the soldering needed?
Don't know what's wrong with CF to IDE though, maybe it's CF related, have tested SanDisk ll, lll, IV Transcend and cheap china CFs - got similar results. Switched to SD's now...
About ETA:
We are still in testing phase, mine and Stephens boards are working stable while Alen has some problems with it. This just needs more reports to catch the bugs, then we can talk about release, yet Stephen clearly pointed out that he'll have no time to work on it, his agenda is already full - don't forget we have work and families so this will always have lower priority to real life...
Retro computer hardware & repair in Germany
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 on A500
Try experimenting with different IDEWAIT and IDEINT resistance values.8 Bit Dreams wrote: Don't know what's wrong with CF to IDE though, maybe it's CF related, have tested SanDisk ll, lll, IV Transcend and cheap china CFs - got similar results. Switched to SD's now...
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: TF536 on A500
Oh!
Thats good idea! installed 1k by default atm
Thats good idea! installed 1k by default atm
Retro computer hardware & repair in Germany