Found this on my bench when I got back from Arizona last night...
Don’t yet have the parts to build it
TF360 Rev 1 Arrives
Moderators: terriblefire, Terriblefire Moderator
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
TF360 Rev 1 Arrives
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF360 Rev 1 Arrives
Excellent, what was the final list of changes from the Revision0?
(With the exception of the obvious 'Notport' addition).
(With the exception of the obvious 'Notport' addition).
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
Just the PLL and NotPort.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
Two observations about the board so far.
first its much more solid in the edge connector than the 328 or 330 (or 360 r0)
Second elecrow STILL have not bevelled the damn edge connector.
first its much more solid in the edge connector than the 328 or 330 (or 360 r0)
Second elecrow STILL have not bevelled the damn edge connector.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF360 Rev 1 Arrives
It looks bevelled from the glint to the left of the centre space in the photo? must be a trick of the light!terriblefire wrote: ↑Fri Oct 11, 2019 8:11 am Second elecrow STILL have not bevelled the damn edge connector.
The green 330 boards had a nice bevel, I assume these 360s were made by a different board house?
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
parts are ordered. Need some kind of clock port hardware at some point. Guess that can wait.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: TF360 Rev 1 Arrives
Just don't buy RapidRoad, you'll regret that
Retro computer hardware & repair in Germany
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
I think all clockport hardware is rubbish. Its a rubbish interface.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF360 Rev 1 Arrives
I do agree, I think it`s only good for the RTC but it`s only my opinion so don`t shoot me guysterriblefire wrote: ↑Fri Oct 11, 2019 2:05 pm I think all clockport hardware is rubbish. Its a rubbish interface.