Feels like I been at it a million years
Its about 95% routed now. The main issue really is the control lines from GLUE to every other chip because loads of signals need to route right across the board, which isn't simple as I already have multiple crossing signals on 3 layers already, so there's no room left . In hindsight the GLUE might have been better going near the ACIA's . Though it begs the question is my very first original route ( https://www.exxosforum.co.uk/forum/viewt ... 7&t=14#p41) where the chips were at the bottom of the board with a common bus, might actually be better *if* it could be squashed down a lot more.
exxos blog - random goings on
Re: exxos blog - random goings on
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: exxos blog - random goings on
29 unroutet airwires hanging off the bus..
29 unroutet airwires hanging off the bus..
and if one green airwire should accidentally on purpose get routed...
There be 28 unroutet airwires hanging off the bus..
29 unroutet airwires hanging off the bus..
and if one green airwire should accidentally on purpose get routed...
There be 28 unroutet airwires hanging off the bus..
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: exxos blog - random goings on
Wasn't me
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: exxos blog - random goings on
The alt-ram boards are finally on order..
I tried to get JLC to make them, but they claim its all "out of spec" and talking to them about issues is a uphill battle, even more so since Icky sent them a H4 for review 2 weeks ago and they not replied.
So I have passed it over to my regular PCB guy who says no problem to make them, though unfortunately they end up 4x the price of JLC. Though you get the service you pay for I guess.
These do not have the PLD control chip on them. This current board is designed to stack onto flashy-clock to drive it. Though as this RAM board is "stand alone" it will eventually find its way onto the 50MHz SEC booster board so we can have full speed 50MHz access to "fast-ram".
Once I have a working alt-ram board, I can finally start adding proper benchmarks to GB6 as currently the alt-ram tests are not actually calibrated.
I tried to get JLC to make them, but they claim its all "out of spec" and talking to them about issues is a uphill battle, even more so since Icky sent them a H4 for review 2 weeks ago and they not replied.
So I have passed it over to my regular PCB guy who says no problem to make them, though unfortunately they end up 4x the price of JLC. Though you get the service you pay for I guess.
These do not have the PLD control chip on them. This current board is designed to stack onto flashy-clock to drive it. Though as this RAM board is "stand alone" it will eventually find its way onto the 50MHz SEC booster board so we can have full speed 50MHz access to "fast-ram".
Once I have a working alt-ram board, I can finally start adding proper benchmarks to GB6 as currently the alt-ram tests are not actually calibrated.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: exxos blog - random goings on
More Eagle oddities..
Take the yellow track.. it goes from the SMT chip on the left, top layer, then jumpers over the blue tracks, then jumps back to the top layer again
When it could have just gone right across the board on just the top layer..
Anywhos, the last few tracks are tricky as a lot of GLUE control lines to route right across the board.
Take the yellow track.. it goes from the SMT chip on the left, top layer, then jumpers over the blue tracks, then jumps back to the top layer again
When it could have just gone right across the board on just the top layer..
Anywhos, the last few tracks are tricky as a lot of GLUE control lines to route right across the board.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: exxos blog - random goings on
and it's done
Let's never ever manually route a motherboard again!
Got a whole load of tidying up and DRC stuff to do, but hopefully I can get this finished before the weekend
Let's never ever manually route a motherboard again!
Got a whole load of tidying up and DRC stuff to do, but hopefully I can get this finished before the weekend
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
- stephen_usher
- Posts: 5656
- Joined: Mon Nov 13, 2017 7:19 pm
- Location: Oxford, UK.
- Contact:
Re: exxos blog - random goings on
I dare you to design the next board with the chips set radially around the GLUE and with circular data and address buses.
All this linearity is so passé.
All this linearity is so passé.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
Re: exxos blog - random goings on
We already have curvesstephen_usher wrote: ↑Thu Oct 24, 2019 6:38 pm I dare you to design the next board with the chips set radially around the GLUE and with circular data and address buses.
All this linearity is so passé.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.