The A4000 is being ReAmiga’d so this isn’t a problem anymore. They're now cheaper. Even still so long as the battery damage doesnt stop the mouse working you're ok because the RAM in the TF card will whip everything elses butt.Maximilian wrote: ↑Sat Sep 14, 2019 2:20 pm For the price of a working A4000 without battery damage you could buy a nice second hand car over here, even for the repaired ones you can buy a car, so that isn't an option for me, also it would be quite a small market, An A2000 would be a lot cheaper but you are stuck with OCS.
Nah.. no extra connectors. No breakouts. No options. Thats an extra support headache i dont need. Feel free to do your own version though and take this on.What about an extra (default not mounted) connector on the top or the bottom of the riser facing outwards?, like the SX1 riser has but probably with a lot less pins and a cheap connector like the IDE connector.
That way you could connect the Pi with a small adapter board that has a small CLPD on its own, would it be possible to let the TF board talk to that with more than the usual 14Mhz?
Well if you want to do the normal Pi thing it already exists in the A314. I see the Pi Compute module like a CPU itself. A replacement/improvement on an PPC board for those wanting 3D graphics etc on the amiga.Why use a compute module?, you have to bring out all the connectors you need and the cost would be much higher.
Would you need any connections that are not on the normal Pi?