Motherboard capacitors - which to replace?

Various tweaks and fixes from video ghosting to audio fixes etc.
Post Reply
kodak80
Posts: 98
Joined: Sat Oct 21, 2017 1:14 am
Location: Brisbane, Australia
Contact:

Motherboard capacitors - which to replace?

Post by kodak80 » Thu Dec 21, 2017 8:35 am

OK, I have now had fun replacing capacitors on my ZX Spectrum boards (x3) and changing these to composite video. This was my learning ground and all are now done and working. I have also replaced the capacitors on 2 ST PSUs and they work well. Still working up to replacing my Falcon NVRAM.

Whilst Exxos has the replacement for the 4700uf 16v capacitor in his store. I was looking at my STE motherboard and there are quite a few capacitors on it. I am wondering which ones can be replaced or to put it another way, which ones should NOT be replaced? I also have some STFMs so same question for this motherboard as well? :D
Atari Falcon 030 | Atari 1040 STE | Atari 1040 STFM | Atari 1040 STF | Kryoflux & Supercard Pro Flux boards
Admin of Atari ST Review Magazine Archive: http://www.ataristreview.com

User avatar
exxos
Site Admin
Site Admin
Posts: 4995
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Motherboard capacitors - which to replace?

Post by exxos » Thu Dec 21, 2017 9:45 am

As far as I got is the video re-cap kit on the STFM..

Any electrolytics should be replaced. I did wonder about designing small adapter pcbs for all caps (kinda like my 4,700 kit) but using SMT caps.. but its a lot of kits to mash up... plus I doubt there will be many users still in the next 30 years anyway :lol:
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

kodak80
Posts: 98
Joined: Sat Oct 21, 2017 1:14 am
Location: Brisbane, Australia
Contact:

Re: Motherboard capacitors - which to replace?

Post by kodak80 » Thu Dec 21, 2017 9:59 am

As there was a 1uf timing capacitor on the PSU that you recommend NOT be changed, I thought that there may be similar ones on the motherboard that if changed may cause issues?

Anyone already re-capped all capacitors on their motherboards?
Atari Falcon 030 | Atari 1040 STE | Atari 1040 STFM | Atari 1040 STF | Kryoflux & Supercard Pro Flux boards
Admin of Atari ST Review Magazine Archive: http://www.ataristreview.com

User avatar
exxos
Site Admin
Site Admin
Posts: 4995
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Motherboard capacitors - which to replace?

Post by exxos » Thu Dec 21, 2017 10:13 am

kodak80 wrote:
Thu Dec 21, 2017 9:59 am
As there was a 1uf timing capacitor on the PSU that you recommend NOT be changed, I thought that there may be similar ones on the motherboard that if changed may cause issues?
Its a good point.. I haven't of course looked into every capacitor on the motherboard, but I do not believe it would cause any harm anywhere..

As for the PSU, changing the capacitor resulting timing differences within the switch mode control loop. As a capacitor basically poor quality, it actually works really well with the value it actually is. If it was replaced, it would have to be replaced with same "spec" capacitor, which would then make it a little pointless changing it in the first place.

I doubt there is such timing related capacitors on the motherboard, other than the reset circuit. I think mostly coupling or smoothing capacitors along the motherboard to changing them the better ones is a good thing.

I was thinking more of ceramic capacitors in particular relating to the audio circuit, as electrolytic cause a lot of hiss, and ceramics do not. It is also possible they may work better in the video circuit is well. But it is all something I simply do not have time to try out :(
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

mikro
Posts: 148
Joined: Mon Aug 28, 2017 11:22 pm

Re: Motherboard capacitors - which to replace?

Post by mikro » Thu Dec 21, 2017 10:55 am

kodak80 wrote:
Thu Dec 21, 2017 8:35 am
OK, I have now had fun replacing capacitors on my ZX Spectrum boards (x3) and changing these to composite video. This was my learning ground and all are now done and working. I have also replaced the capacitors on 2 ST PSUs and they work well. Still working up to replacing my Falcon NVRAM.
:thumbup: Great job, Rob! I hope our Atari sessions have been at least partially useful in motivating you to learn this kind of skills! I'm afraid that while I'm in Tassie you will become ten times better at soldering than I am now. :D (funny, I've learned how to solder in QLD, too ;-)).

gazak28
Posts: 13
Joined: Mon Sep 04, 2017 10:26 pm

Re: Motherboard capacitors - which to replace?

Post by gazak28 » Sat Dec 30, 2017 11:23 pm

Hi Mikro,
Both Rob and I have both had to learn how to do soldering, when a certain person says they are going to do it and lets you down. ;)
I should have taken up your offer, more fool me.
But on the good side Rob has shown me how to change the caps on the Falcon PSU, and I have replaced the NVRAM on both Falcons :D and both working good.
Will practice more soldering skills, when I look at some of the STE boards I have laying around that need fixing or upgrades.
Until next time happy holidaying in the Apple Isle.

Gary

tzok
Posts: 88
Joined: Sat Dec 30, 2017 2:27 pm

Re: Motherboard capacitors - which to replace?

Post by tzok » Fri Jul 13, 2018 11:33 am

I have recapped a few STs and never found a faulty capacitor on its motherboard. Only one have slightly corroded aluminum cup, but still was well in specs according to the capacity, ESR and leakage. If they are sealed well (and apparently they are) and not put to excessive heat, they should be ok for the next 30 years... For sure it will do more harm to replace them with a modern low cost capacitors, and hand-soldered without a proper thermal profile.

User avatar
exxos
Site Admin
Site Admin
Posts: 4995
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Motherboard capacitors - which to replace?

Post by exxos » Fri Jul 13, 2018 12:06 pm

It's not so simple to simply test with ESR meter to see if caps are OK or not. You only get a indication, not a straight forward good or bad test. I tested some a while ago, if you heat them up (like in PSU's next to heatsink) value increases a lot and ESR falls to near zero. Surely not ? Testing newer caps, ESR and value remains a lot more stable regardless of temperature. I need to do more tests, though if the value & ESR changes a lot, I would say the dielectric is starting to break down causing the "thinner" layers and higher values. Ironically you can end up with a 30 year old capacitor which can appear to have a better ESR than a modern one.

In my old job we found capacitors which gave a higher value than expected would not work in power supplies powering lamp arrays. The lamps would flicker like no capacitor was even there. Mix in that capacitors have 20% tolerance, and such capacitors can still be within that tolerance and still be faulty.

So sure, old caps may work fine for a long time, depends on a lot of factors. I need to do more work on this, but no time to build up testing circuits for it all at the moment. Though only proper testing can say if cap is good or not, meters are no good for accurate readings (unfortunately).
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

Post Reply