kodak80 H4 build (x2)
Re: kodak80 H4 build (x2)
What monitor are you using there? Sure is a clean display.
Re: kodak80 H4 build (x2)
Yep, a friend found these Dell monitors a while ago and they work great with the ST. It is a Dell P2314Ht but be aware that they may have different internals.
I am also using my own ST2VGA adapter.
Atari Falcon 030 | Atari 1040 STE | Atari 1040 STFM | Atari 1040 STF | Kryoflux & Supercard Pro Flux boards
Creator of the Atari ST Review magazine archive: https://www.chillichai.com/atari-st-review
Creator of the Atari ST Review magazine archive: https://www.chillichai.com/atari-st-review
Re: kodak80 H4 build (x2)
I'm using a Dell 2001FP with mine, and it's okay, but not nearly that clean. I picked up one 2001FP back when they were new, and was pleased to discover it will take 15 kHz (I hadn't bought it for that reason), so later on I picked up a couple more for cheap on auction-site-that-shall-not-be-named. One thing that's nice about them is they can take sync-on-green, which isn't important in the Atari world, but matters for some of the old Unix workstation oddities.
Re: kodak80 H4 build (x2)
I do want to get some badges made, but no idea where to get them done?
That could be tricky to keep tabs of now all boards of shipped out. I can put numbers on any future batches if people want me to ?
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: kodak80 H4 build (x2)
I found a couple of places to get you started for name plates and logos
https://www.alibaba.com/showroom/electronic-badge.html
https://www.miladisplays.com/plasticnameplates.htm
It would probably make it too expensive to make a serial number part of the badge? Since each one would be unique!
https://www.alibaba.com/showroom/electronic-badge.html
https://www.miladisplays.com/plasticnameplates.htm
It would probably make it too expensive to make a serial number part of the badge? Since each one would be unique!
ST: TT030 10/32m; Falcon 030 14m(2); MSTe 4m; MST 4m(3); MST 4m AdSpeed; 1040STf 4m(4); ST 4m(2); MF 44 w/SCSI2SD(3); MF 30(3); MF30 w/Drem
8-Bit: 320XE w/Ultraspeed+/FIXXL; 320XE; 130XE w/Ultimate 1m; 600XL w/Ultimate 1m; 800XL w/Omnimon XL/Boss XL/Omniview XL; 800 w/Incognito; 800 48K; Black Box Enhanced(3); 1050 Super Archiver II; 1050 Happy(2); XF551 360K(2); XF551 720K; HD Tower 480m
8-Bit: 320XE w/Ultraspeed+/FIXXL; 320XE; 130XE w/Ultimate 1m; 600XL w/Ultimate 1m; 800XL w/Omnimon XL/Boss XL/Omniview XL; 800 w/Incognito; 800 48K; Black Box Enhanced(3); 1050 Super Archiver II; 1050 Happy(2); XF551 360K(2); XF551 720K; HD Tower 480m
Re: kodak80 H4 build (x2)
I have now got the RTC working on board 2. I now have the date and time set and they are kept ticking when the H4 is turned off.
XCONTROL.ACC reports date and time correctly.
Followed the guide here: https://www.exxosforum.co.uk/atari/last/RTC/index.htm
XCONTROL.ACC reports date and time correctly.
Followed the guide here: https://www.exxosforum.co.uk/atari/last/RTC/index.htm
Atari Falcon 030 | Atari 1040 STE | Atari 1040 STFM | Atari 1040 STF | Kryoflux & Supercard Pro Flux boards
Creator of the Atari ST Review magazine archive: https://www.chillichai.com/atari-st-review
Creator of the Atari ST Review magazine archive: https://www.chillichai.com/atari-st-review
Re: kodak80 H4 build (x2)
Booted my H4 with my MicroCosmos today and everything seems to work fine.
Both boards now have RTC set up and working.
Both boards now have RTC set up and working.
Atari Falcon 030 | Atari 1040 STE | Atari 1040 STFM | Atari 1040 STF | Kryoflux & Supercard Pro Flux boards
Creator of the Atari ST Review magazine archive: https://www.chillichai.com/atari-st-review
Creator of the Atari ST Review magazine archive: https://www.chillichai.com/atari-st-review
Re: kodak80 H4 build (x2)
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: kodak80 H4 build (x2) +1 more...
These DMA H4 FIX PCBs arrived yesterday:
@exxos Where will the FDCS connect to on the H4 board? IS this the same point as Icky's bodge with an inverted IC?
I have also started building board 3 for GAZZAK as he does not have time. Some of the SMT components have now been soldered into place and will follow Smonson with the DAC IC and cut the tracks.
Now waiting on the IC component to build it and test it. Hopefully will arrive this coming week.@exxos Where will the FDCS connect to on the H4 board? IS this the same point as Icky's bodge with an inverted IC?
I have also started building board 3 for GAZZAK as he does not have time. Some of the SMT components have now been soldered into place and will follow Smonson with the DAC IC and cut the tracks.
Atari Falcon 030 | Atari 1040 STE | Atari 1040 STFM | Atari 1040 STF | Kryoflux & Supercard Pro Flux boards
Creator of the Atari ST Review magazine archive: https://www.chillichai.com/atari-st-review
Creator of the Atari ST Review magazine archive: https://www.chillichai.com/atari-st-review
Re: kodak80 H4 build (x2)
Just soldered the pins into one to see how it sits on the H4 board (board 3):
With 245 chip sat in the top (not yet soldered as need the SMT component soldered first): This is how it looks in board 2 which has a socket in place:
With 245 chip sat in the top (not yet soldered as need the SMT component soldered first): This is how it looks in board 2 which has a socket in place:
Atari Falcon 030 | Atari 1040 STE | Atari 1040 STFM | Atari 1040 STF | Kryoflux & Supercard Pro Flux boards
Creator of the Atari ST Review magazine archive: https://www.chillichai.com/atari-st-review
Creator of the Atari ST Review magazine archive: https://www.chillichai.com/atari-st-review