TF Riser Revision 0 Arrives

TF CD32 Riser

Moderators: terriblefire, Terriblefire Moderator

Post Reply
terriblefire
Moderator Team
Moderator Team
Posts: 4204
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
YouTube: terriblefire
Contact:

TF Riser Revision 0 Arrives

Post by terriblefire » Wed Jan 15, 2020 3:44 pm

Boards are here.
IMG_1645.jpg
IMG_1645.jpg (366.84 KiB) Viewed 5178 times
Keeping in mind that I dont have a firmware for the ARM... Who was after one to help out with dev?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."

User avatar
arkadiusz.makarenko
Moderator Team
Moderator Team
Posts: 961
Joined: Wed Jun 19, 2019 7:36 am
Location: Edinburgh

Re: A new riser?

Post by arkadiusz.makarenko » Wed Jan 15, 2020 6:36 pm

I would like to buy one, please.

PS.
I am staring to look at this : https://www.st.com/resource/en/user_man ... 105256.pdf

I have only boards with f103 which do not have required USB OTG. Any day now I should get f407 dev board, and I will be able to start looking at this properly. Meanwhile I am getting used to CubeIDE,HAL libraries and brilliant debbuging options via ST-Link
Do not trust people. They are capable of greatness.
~ Stanislaw Lem

terriblefire
Moderator Team
Moderator Team
Posts: 4204
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
YouTube: terriblefire
Contact:

Re: A new riser?

Post by terriblefire » Wed Jan 15, 2020 7:33 pm

arkadiusz.makarenko wrote:
Wed Jan 15, 2020 6:36 pm
I would like to buy one, please.

PS.
I am staring to look at this : https://www.st.com/resource/en/user_man ... 105256.pdf

I have only boards with f103 which do not have required USB OTG. Any day now I should get f407 dev board, and I will be able to start looking at this properly. Meanwhile I am getting used to CubeIDE,HAL libraries and brilliant debbuging options via ST-Link
I'll slip a board in with your TF536.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."

User avatar
arkadiusz.makarenko
Moderator Team
Moderator Team
Posts: 961
Joined: Wed Jun 19, 2019 7:36 am
Location: Edinburgh

Re: A new riser?

Post by arkadiusz.makarenko » Wed Jan 15, 2020 8:12 pm

Great thank you.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem

terriblefire
Moderator Team
Moderator Team
Posts: 4204
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
YouTube: terriblefire
Contact:

Re: A new riser?

Post by terriblefire » Thu Jan 16, 2020 9:40 pm

Started the build...
IMG_1650.jpg
IMG_1650.jpg (441.68 KiB) Viewed 5091 times
Waiting for the ARM cpu tomorrow.

One thing to note is that the MCA connector needed the tabs trimmed off to fit due to the way my MCA connector tabs are.

EDIT: I actually think it will be far easier to develop on this board than a dev board.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."

arananet
Posts: 14
Joined: Thu Nov 29, 2018 2:00 pm

Re: A new riser?

Post by arananet » Thu Jan 16, 2020 10:07 pm

looks great S.

bprepared
Posts: 13
Joined: Thu Nov 22, 2018 3:46 pm

Re: TF Riser Revision 0 Arrives

Post by bprepared » Fri Jan 17, 2020 11:55 am

Watching this with great interest and anticipation, particularly with regards to the ARM HID USB part :D

terriblefire
Moderator Team
Moderator Team
Posts: 4204
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
YouTube: terriblefire
Contact:

Re: TF Riser Revision 0 Arrives

Post by terriblefire » Fri Jan 17, 2020 12:26 pm

bprepared wrote:
Fri Jan 17, 2020 11:55 am
Watching this with great interest and anticipation, particularly with regards to the ARM HID USB part :D
You are welcome to rework/integrate your changes to the video system if you want. Spare board for you if you want
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."

bprepared
Posts: 13
Joined: Thu Nov 22, 2018 3:46 pm

Re: TF Riser Revision 0 Arrives

Post by bprepared » Fri Jan 17, 2020 3:43 pm

Thanks, would appreciate the board for sure, and if/when the ARM USB and RTC is working I'd like to try and integrate (with full credits to all parties) them onto a Firebird module, maybe even a Notport. ;)
PM inbound with address.

wairnair
Posts: 33
Joined: Sun Dec 09, 2018 3:53 pm

Re: TF Riser Revision 0 Arrives

Post by wairnair » Fri Jan 17, 2020 9:44 pm

So, it is happening. Amazing.

Post Reply

Return to “TF CD32 Riser”