Limited TF536 Run - Sort of Sales (All gone)

Post by **PhilC** » Sun Jan 19, 2020 5:29 pm

Well done guys, certainly gives me confidence to get mine all built up when the parts arrive tomorrow.

Post by **terriblefire** » Sun Jan 19, 2020 5:42 pm

Awesome.. i was worried i was letting a gene out of the bottle with this run.

Post by **alenppc** » Sun Jan 19, 2020 5:46 pm

terriblefire wrote: ↑Sun Jan 19, 2020 5:42 pm Awesome.. i was worried i was letting a gene out of the bottle with this run.

Let's see how it works for others that had no issues with the original firmware. It is weird how on some machines it worked, but not on others.

Post by **8 Bit Dreams** » Sun Jan 19, 2020 6:16 pm

Will try this fw, however i was pretty happy with CDTV compatible

go0se · Post by **go0se** » Sun Jan 19, 2020 6:52 pm

I'm having issues with the tf536r1_main_top_FULL_PHASE_7 that didn't occur with the original tf536r1_main_top.jed

WHDLoad games drop out sporadically and suffer from graphic artifacts when running :

: DSC_0417.resized.JPG (97.67 KiB) Viewed 2826 times

: DSC_0435.resized.JPG (87.82 KiB) Viewed 2826 times

: DSC_0440.resized.JPG (92.96 KiB) Viewed 2826 times

go0se · Post by **go0se** » Sun Jan 19, 2020 6:57 pm

Also can anyone confirm the correct value for C13? It's listed as 0.1UF 0603 in the BOM but the footprint on the board is for a 1206. Looks like I just threw a 0.1uf 1206 on without paying attention during the build.

PaulJ_2.0 · Post by **PaulJ_2.0** » Sun Jan 19, 2020 7:26 pm

go0se wrote: ↑Sun Jan 19, 2020 6:57 pm Also can anyone confirm the correct value for C13? It's listed as 0.1UF 0603 in the BOM but the footprint on the board is for a 1206. Looks like I just threw a 0.1uf 1206 on without paying attention during the build.

I've used .33uf on c12-c15

PaulJ_2.0 · Post by **PaulJ_2.0** » Sun Jan 19, 2020 7:29 pm

Oh right I think you mean C18 (screen printing isnt clear)
That's 10uf 1206.

Post by **terriblefire** » Sun Jan 19, 2020 7:33 pm

go0se wrote: ↑Sun Jan 19, 2020 6:57 pm Also can anyone confirm the correct value for C13? It's listed as 0.1UF 0603 in the BOM but the footprint on the board is for a 1206. Looks like I just threw a 0.1uf 1206 on without paying attention during the build.

C13 is definitely a 0603.. its one of the level shifer caps.

: c13.JPG (58.46 KiB) Viewed 2808 times

PaulJ_2.0 · Post by **PaulJ_2.0** » Sun Jan 19, 2020 8:03 pm

go0se wrote: ↑Sun Jan 19, 2020 6:52 pm I'm having issues with the tf536r1_main_top_FULL_PHASE_7 that didn't occur with the original tf536r1_main_top.jed

WHDLoad games drop out sporadically and suffer from graphic artifacts when running :

I've not had any problems like that at all.
Have you checked your ram? I use this:
https://archive.org/details/Advanced_Am ... _Australia

You can place the executable on your HDD and run from there or just boot to floppy.

I find it to be very good, once i get a full pass on that I move onto something else than the ram and it's never been wrong.

Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)

Re: Limited TF536 Run - Sort of Sales (All gone)