ST-IDE-ROM Dev Board v1 - BETA Testers
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
Just feed Harry.. looked a little lean.
-
rubber_jonnie
- Site Admin
- Posts: 10641
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
He should be quite happy now, I've also fed him 
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
I knew down deep Harry is a glutton.. 
-
rubber_jonnie
- Site Admin
- Posts: 10641
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
Oooh I forgot this:
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
@exxos , what is the IDE connector pin pitch on the new 1.1 IDE board? Thanks
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
Oh, its the 0.0787 pitch instead of the 0.1 pitch used on the initial board.DoG wrote: ↑Mon Mar 16, 2020 8:31 pmCheck the part list/BOM in this thread. But I can help you right away, it is 2mm
- Untitled.png (10.93 KiB) Viewed 2599 times
-
rubber_jonnie
- Site Admin
- Posts: 10641
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
It's 44 pin ide isn't it, rather than standard 40 pin.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Re: ST-IDE-ROM Dev Board v1 - BETA Testers
Yup, the initial board used a header with 0.1" pitch. So the 0.0787402" pitch are the smaller connectors used with the 44 pin. Guess I'll have to order some one these header pins.rubber_jonnie wrote: ↑Mon Mar 16, 2020 9:04 pm It's 44 pin ide isn't it, rather than standard 40 pin.