TF536 Rev 2 Design Complete (all gone)
Moderators: terriblefire, Terriblefire Moderator
-
- Posts: 91
- Joined: Sat Jan 06, 2018 3:03 pm
- Location: Netherlands
Re: TF536 Rev 2 Design Complete
Splendid design as usual from you . Could you put me on the list, too?
My collection: 1040 STE, TOS 2.06, 4 mb, CosmosEx - 520 STFM, TOS 1.04, 4 mb, Blitter, CosmosEx - 520 STFM, TOS 1.04, 4 mb - 1040 STF, TOS 1.04, 1 mb, Gotek - Amiga 1200 with Blizzard 1220/4 - Amiga 500 + ACA500 - Amiga 500 + TF530, 1 mb chipram hack.
Atari 8 bit: 800XLF, stock - 600XL, Ultimate 1 mb, Sophia RGB - 130XE, 320 kb, Sophia RGB
Sinclair stuff: 3x Spectrum 48KB, Clones: Harlequin, JS128, Nuvo128 and Issue3B replica.
Ultimate64, a few C64 breadbins and Pi1541 for storage.
Atari 8 bit: 800XLF, stock - 600XL, Ultimate 1 mb, Sophia RGB - 130XE, 320 kb, Sophia RGB
Sinclair stuff: 3x Spectrum 48KB, Clones: Harlequin, JS128, Nuvo128 and Issue3B replica.
Ultimate64, a few C64 breadbins and Pi1541 for storage.
Re: TF536 Rev 2 Design Complete
I'm interested, too. I'd go for 2 boards in case I screw one up.
Thanks a bunch!!
Thanks a bunch!!
Re: TF536 Rev 2 Design Complete
Guys, just to repeat what @terriblefire said earlier, hes ordered 10 boards and they are all allocated. If this batch is successful then he will order another 50+
So please save your enthusiastic requests for the next thread where he lists general release.
Thank you.
So please save your enthusiastic requests for the next thread where he lists general release.
Thank you.
If it ain't broke, test it to Destruction.
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 Rev 2 Design Complete (all gone)
PMs have gone out.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 Rev 2 Design Complete (all gone)
All posted.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF536 Rev 2 Design Complete (all gone)
Where could I find the BOM please?
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 Rev 2 Design Complete (all gone)
But its mostly worthless because almost all components on the bottom of the board are already populated.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 Rev 2 Design Complete (all gone)
Have these started arriving yet?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF536 Rev 2 Design Complete (all gone)
Not here yet, but our postal service has slowed down to a crawl due to the coronavirus thing. It takes 2 weeks for stuff to arrive within the country...
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 Rev 2 Design Complete (all gone)
Strange. I ordered 4 Xilinx CPLDs from RS last night at 8pm.. they arrived at 11am.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."