TF360 Status

News & updates for the upcoming 68060 accelerator

Moderators: terriblefire, Terriblefire Moderator

Locked
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF360 Status

Post by terriblefire »

Swapped the pins.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
go0se
Posts: 403
Joined: Sun Nov 25, 2018 7:55 pm

Re: TF360 Status

Post by go0se »

terriblefire wrote: Thu Mar 19, 2020 12:53 pm Swapped the pins.
Good call!, ... "For the many, not the few" :lol:
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF360 Status

Post by terriblefire »

Cannot actually submit an order to JLC.. all their payment options are missing.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF360 Status

Post by terriblefire »

Ten TF360 rev2's are now ordered.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
theq
Posts: 114
Joined: Tue Dec 18, 2018 7:16 pm
Location: North of the Wall

Re: TF360 Status

Post by theq »

terriblefire wrote: Fri Mar 20, 2020 10:45 am Ten TF360 rev2's are now ordered.
WTB! :o
User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: TF360 Status

Post by 8 Bit Dreams »

Wow!!! This is pretty fast!
Hopefully there will be few new streams also :arrow: :)
Retro computer hardware & repair in Germany
arananet
Posts: 15
Joined: Thu Nov 29, 2018 2:00 pm

Re: TF360 Status

Post by arananet »

Please add me for one TF360 too. The 330 was great, this one looks even better.

THanks.
Higgy
Posts: 400
Joined: Tue Apr 23, 2019 8:05 pm
Location: Somerset

Re: TF360 Status

Post by Higgy »

I hope your cold is getting better and it was not 'the cold'. Your an AMIGA Key Worker :)
What can we expect from Rev 2 360 tweeks:
Software clock speed adjustment as per TF1260. Additional caps & tweeks to hopefully break the 100Mhz barrier. Improved IDE speed.
Thanks.
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF360 Status

Post by terriblefire »

Its just fixed mistakes in the rev1. Most of these fixes appeared in the TF1260 r1 already.

The speed limits are entirely firmware at this stage. i know what they are but i've not had time to get deep into fixing them.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Doedehoelahoep
Posts: 1
Joined: Sun Apr 05, 2020 6:53 pm

Re: TF360 Status

Post by Doedehoelahoep »

I’m definitely interested in a TF360 PCB. Hopefully you can put me on the list. 😎👍🏻
Locked

Return to “TF360”