Module ESP8266 without TF on Amiga
Moderators: terriblefire, Terriblefire Moderator
Module ESP8266 without TF on Amiga
Welcome
Motivated by the owners of TF330 have the ability to use the internet via WiFi
I made a schematic and board for ESP8266 without using TF
As I understand the system must be connected to serial port not to parallel
I also read that the port in Amiga has only 20mA so it is not suitable for powering the system
therefore a USB port is added
Unfortunately the system is not checked due to the lack of parts in the house
Motivated by the owners of TF330 have the ability to use the internet via WiFi
I made a schematic and board for ESP8266 without using TF
As I understand the system must be connected to serial port not to parallel
I also read that the port in Amiga has only 20mA so it is not suitable for powering the system
therefore a USB port is added
Unfortunately the system is not checked due to the lack of parts in the house
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Module ESP8266 without TF on Amiga
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Module ESP8266 without TF on Amiga
This one is Bluetooth no WiFi
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Module ESP8266 without TF on Amiga
Oh. Ok. well personally I would use DB9 to reduce the PCB size. Then use a gender changer. I'd also consider not bothering putting the chip on it but make an ESP header. That way when extra super duper versions come out your wont need to respin your board.
If the 3 pin header is for programming vs usage then you may want to find a way to power cycle it if you havent thought of that already.
EDIT: Also you can get power from the floppy connector...
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Module ESP8266 without TF on Amiga
DB9 + Header is also way easier to assemble and give the board wider appeal.
Consider a 5V 0.1" header on there for anyone who doesnt want to bother with USB power.
Consider a 5V 0.1" header on there for anyone who doesnt want to bother with USB power.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Module ESP8266 without TF on Amiga
What I wanted to achieve is a uniform module that we connect to the amiga when I used DB9 we would have to use adapters
With the addition of pin header to the power supply no problem can be added
With the addition of pin header to the power supply no problem can be added
Re: Module ESP8266 without TF on Amiga
Yesterday i got adapter
I try to connect everything like on the picture
I flash ESP8266 witch both files https://github.com/terriblefire/terribl ... er/esp8266
OFFSET i setup like names files .bin
I dnt have to setup ESP8266 module via AT commands?Just flash firmware?
For flashing i use Nodemcu on Windows
For connect Internet i use MiamiDX
But dnt know how to install drivers Icslip-sana2.lha on Amiga and how to run this install_script
Please help me
I try to connect everything like on the picture
I flash ESP8266 witch both files https://github.com/terriblefire/terribl ... er/esp8266
OFFSET i setup like names files .bin
I dnt have to setup ESP8266 module via AT commands?Just flash firmware?
For flashing i use Nodemcu on Windows
For connect Internet i use MiamiDX
But dnt know how to install drivers Icslip-sana2.lha on Amiga and how to run this install_script
Please help me
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Module ESP8266 without TF on Amiga
My script is for roadshow only.kulamario wrote: ↑Wed Apr 15, 2020 3:20 pm Yesterday i got adapter
I try to connect everything like on the picture
I flash ESP8266 witch both files https://github.com/terriblefire/terribl ... er/esp8266
OFFSET i setup like names files .bin
I dnt have to setup ESP8266 module via AT commands?Just flash firmware?
For flashing i use Nodemcu on Windows
For connect Internet i use MiamiDX
But dnt know how to install drivers Icslip-sana2.lha on Amiga and how to run this install_script
Please help me
For anything else you need to do this loooooong process.
https://hackaday.com/2019/07/03/amiga-i ... n-esp8266/
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Module ESP8266 without TF on Amiga
so best way is install Roadshow and then start test
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Module ESP8266 without TF on Amiga
To prove your hardware is working i would install roadshow and then run my script. Also Roadshow uses less RAM (i think) than most.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."