TF536 Rev 2 Design Complete (all gone)

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

redhawk668
Posts: 91
Joined: Sat Jan 06, 2018 3:03 pm
Location: Netherlands

Re: TF536 Rev 2 Design Complete

Post by redhawk668 »

Splendid design as usual from you :D . Could you put me on the list, too?
My collection: 1040 STE, TOS 2.06, 4 mb, CosmosEx - 520 STFM, TOS 1.04, 4 mb, Blitter, CosmosEx - 520 STFM, TOS 1.04, 4 mb - 1040 STF, TOS 1.04, 1 mb, Gotek - Amiga 1200 with Blizzard 1220/4 - Amiga 500 + ACA500 - Amiga 500 + TF530, 1 mb chipram hack.

Atari 8 bit: 800XLF, stock - 600XL, Ultimate 1 mb, Sophia RGB - 130XE, 320 kb, Sophia RGB

Sinclair stuff: 3x Spectrum 48KB, Clones: Harlequin, JS128, Nuvo128 and Issue3B replica.

Ultimate64, a few C64 breadbins and Pi1541 for storage.
pipper
Posts: 42
Joined: Tue Apr 23, 2019 5:55 am

Re: TF536 Rev 2 Design Complete

Post by pipper »

I'm interested, too. I'd go for 2 boards in case I screw one up.

Thanks a bunch!!
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: TF536 Rev 2 Design Complete

Post by PhilC »

Guys, just to repeat what @terriblefire said earlier, hes ordered 10 boards and they are all allocated. If this batch is successful then he will order another 50+

So please save your enthusiastic requests for the next thread where he lists general release.

Thank you.
If it ain't broke, test it to Destruction.
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF536 Rev 2 Design Complete (all gone)

Post by terriblefire »

PMs have gone out.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF536 Rev 2 Design Complete (all gone)

Post by terriblefire »

All posted.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Subzero79
Posts: 73
Joined: Wed Sep 25, 2019 8:57 pm

Re: TF536 Rev 2 Design Complete (all gone)

Post by Subzero79 »

Where could I find the BOM please?
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF536 Rev 2 Design Complete (all gone)

Post by terriblefire »

Subzero79 wrote: Tue Apr 14, 2020 2:33 pm Where could I find the BOM please?
tf536.csv
(14.27 KiB) Downloaded 194 times
But its mostly worthless because almost all components on the bottom of the board are already populated.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF536 Rev 2 Design Complete (all gone)

Post by terriblefire »

Have these started arriving yet?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
alenppc
Moderator Team
Moderator Team
Posts: 906
Joined: Thu Nov 08, 2018 12:59 pm

Re: TF536 Rev 2 Design Complete (all gone)

Post by alenppc »

terriblefire wrote: Fri Apr 17, 2020 1:38 pm Have these started arriving yet?
Not here yet, but our postal service has slowed down to a crawl due to the coronavirus thing. It takes 2 weeks for stuff to arrive within the country...
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF536 Rev 2 Design Complete (all gone)

Post by terriblefire »

alenppc wrote: Fri Apr 17, 2020 2:30 pm
terriblefire wrote: Fri Apr 17, 2020 1:38 pm Have these started arriving yet?
Not here yet, but our postal service has slowed down to a crawl due to the coronavirus thing. It takes 2 weeks for stuff to arrive within the country...
Strange. I ordered 4 Xilinx CPLDs from RS last night at 8pm.. they arrived at 11am.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Post Reply

Return to “TF536”