Turrican II intro music

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

terriblefire
Moderator Team
Moderator Team
Posts: 5389
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Turrican II intro music

Post by terriblefire »

Ok this fixes it for me... please confirm someone...
tf536r2_2020_8_1.zip
(18.75 KiB) Downloaded 250 times
Its basically caused by the 030 being fractionally slower on the 68000 bus when given the same clock. You can all thank @exxos, GemBench and the Atari ST for the fix. As i've pinched this from what i was doing on the ST.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
FluffyRedLobster
Posts: 41
Joined: Sun Apr 07, 2019 2:53 pm

Re: Turrican II intro music

Post by FluffyRedLobster »

So with this firmware...

Turrican 2 dodgy ADF written to floppy - perfect :)
Turrican 2 WHDLoad slave 1.8 - perfect :)
Turrican 2 WHDLoad slave 2.1 - perfect :)
.
.
.
Damocles text timing (WHDload slave 1.3) - perfect! :D

It's a winner!

I'm not quite sure what to say other than cracking job TF! And the ST folks :)
TF536 full copper top 030, Amigakit SD adapter, A500 Rev6a, KS3.1, Boobip 2MB w/ Gary Adapter
User avatar
arkadiusz.makarenko
Moderator Team
Moderator Team
Posts: 1208
Joined: Wed Jun 19, 2019 7:36 am
Location: Edinburgh

Re: Turrican II intro music

Post by arkadiusz.makarenko »

I have just finished testing, and sound issues are gone on my TF536 as well :)

Thank you for this bugfix.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
terriblefire
Moderator Team
Moderator Team
Posts: 5389
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Turrican II intro music

Post by terriblefire »

Thanks i've pushed this to the github binaries area.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
go0se
Posts: 404
Joined: Sun Nov 25, 2018 7:55 pm

Re: Turrican II intro music

Post by go0se »

Sound issues are no longer present on an A500+ and a ... CDTV. Great stuff!

The new firmware also appears to have reduced the boot time of a SD card WB3.9 FFS image significantly compared to the previous firmware that I was using... :o

Perhaps I'm behind the curve and have missed a previous update? I think I need to investigate this one further! :)
terriblefire
Moderator Team
Moderator Team
Posts: 5389
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Turrican II intro music

Post by terriblefire »

I've added an r1 firmware to the binary on github too.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
arkadiusz.makarenko
Moderator Team
Moderator Team
Posts: 1208
Joined: Wed Jun 19, 2019 7:36 am
Location: Edinburgh

Re: Turrican II intro music

Post by arkadiusz.makarenko »

terriblefire wrote: Sat Aug 01, 2020 9:36 pm I've added an r1 firmware to the binary on github too.
I am curious if this will fix A2000 issue.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
terriblefire
Moderator Team
Moderator Team
Posts: 5389
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Turrican II intro music

Post by terriblefire »

arkadiusz.makarenko wrote: Sat Aug 01, 2020 9:39 pm
terriblefire wrote: Sat Aug 01, 2020 9:36 pm I've added an r1 firmware to the binary on github too.
I am curious if this will fix A2000 issue.
Unlikely but possible. I have another thing i want to do before A2000.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
FluffyRedLobster
Posts: 41
Joined: Sun Apr 07, 2019 2:53 pm

Re: Turrican II intro music

Post by FluffyRedLobster »

go0se wrote: Sat Aug 01, 2020 9:18 pm Sound issues are no longer present on an A500+ and a ... CDTV. Great stuff!

The new firmware also appears to have reduced the boot time of a SD card WB3.9 FFS image significantly compared to the previous firmware that I was using... :o

Perhaps I'm behind the curve and have missed a previous update? I think I need to investigate this one further! :)
I can't say I noticed a boot time improvement but I wasn't really paying that much attention as I never felt boot times were slow in the first place.

I just did a quick sysinfo drive speed test though (I know, it can't be trusted) and it now averages around 2.9 - used to be more like 2.7. So who knows!
TF536 full copper top 030, Amigakit SD adapter, A500 Rev6a, KS3.1, Boobip 2MB w/ Gary Adapter
go0se
Posts: 404
Joined: Sun Nov 25, 2018 7:55 pm

Re: Turrican II intro music

Post by go0se »

Further (read proper) tests indicate that the boot times are equivalent on average with the previous firmware - i.e. absolutely fine but not any faster. I fell foul of having multiple Workbench images and Amigas sitting in front of me and not comparing like for like images so the earlier boot time report was a red herring.

This firmware definitely does seem to have solved the music slowdown issue. I will use it on builds from now on to check stability and for any regression.
Post Reply

Return to “TF536”