Another pink prototype print, this time of the removable back panel. One way or another @exxos will get his pink case
A few tweaks on the bottom case part and hopefully print out that in the next few days.
STFM case remake
Re: STFM case remake
Edit:
No need for RF hole though
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: STFM case remake
Oh yep.. Plus logo . Though icons should be easier now the back is flat printed
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
- tony.reynolds
- Posts: 34
- Joined: Mon Apr 06, 2020 3:54 am
Re: STFM case remake
This is superb work, niiiiice job!
;Manually change to secret room.
LDA #$1E ;Set room to secret room. ;2
STA VSYNC,X ;And make it current. ;4
LDA #$03 ;Set the X coordinate.;2
STA VBLANK,X ;4
JMP MovementReturn ;And Exit. ;3
LDA #$1E ;Set room to secret room. ;2
STA VSYNC,X ;And make it current. ;4
LDA #$03 ;Set the X coordinate.;2
STA VBLANK,X ;4
JMP MovementReturn ;And Exit. ;3
Re: STFM case remake
Transparent would look so cool, is that even possible though?
Re: STFM case remake
@shintek - I did look into clear ABS a while back for a different project and most always ends up opaque or frosted. There was one reporting to be truly clear but it was about £50 a reel so didn't fork out to see if it worked or not.
- rubber_jonnie
- Site Admin
- Posts: 10639
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: STFM case remake
@Icky Nice job Can't wait to see the full case
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Re: STFM case remake
Started on the text for rear panel and then need to do the icons. Will have to see how it actually comes out on the print.
Re: STFM case remake
Just playing around with some more printed parts. Not the best of keyboards its a defunct one. Just need a few tweaks, very minor adjustments. e.g. 1 mm extra on the function key aperture lengthways and width ways as its a little tight.