EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION

IDE, ACSI etc kits and products.
User avatar
GadgetUK164
Posts: 202
Joined: Fri Jan 04, 2019 2:26 pm

Re: EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION

Post by GadgetUK164 » Wed Sep 23, 2020 5:00 pm

Nice work =D Looks really cool! If I stacked the 16Mhz CPU mod on this, would it work? (assuming it would still fit under the keyboard)
My YouTube Channel - www.youtube.com/GadgetUK164

thecaver99
Posts: 17
Joined: Tue Sep 01, 2020 7:18 pm

Re: EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION

Post by thecaver99 » Wed Sep 23, 2020 6:45 pm

i have connected both wires and if i have id check on it failes to read but un check id and it reads fine now

thecaver99
Posts: 17
Joined: Tue Sep 01, 2020 7:18 pm

Re: EXXOS IDE V1.1 R1C BUILD & INSTALL INFORMATION

Post by thecaver99 » Thu Sep 24, 2020 4:17 pm

i've nearly finished building the adapter just have to get 2 68000 sockets but now looking at the st does one have to cut the long plastic pilaer to make it fit aas cant see any other way for it to go in.
i was looking at one of the amiga 500 cpu re-locators as it would shift the cpu over and may clear the pillar.

Post Reply

Return to “HARD DRIVES”