exxos blog - random goings on

DoG · Post by **DoG** » Tue Nov 24, 2020 10:37 pm

Icky wrote: ↑Tue Nov 24, 2020 10:34 pm Hope you got the resistor networks values right otherwise its going to be one very bright board

It almost Xmas. Time for some twinkles!

Post by **exxos** » Tue Nov 24, 2020 11:29 pm

Icky wrote: ↑Tue Nov 24, 2020 10:34 pm Hope you got the resistor networks values right otherwise its going to be one very bright board

Yeah, I had the LEDs at 7mA then worked out it was going to pull 4 amps

I've dropped it to 5mA now, but dare not go much lower.

Post by **exxos** » Fri Nov 27, 2020 12:42 am

Been working constantly on my bus sniffer all day. Done version 2 which is in production now. This one is a bit smaller and got the right bits on it this time..I hope..

14 hours straight it took to redo it. Fingers need resting now for a few days. I got mother to shift stuff about and do some repetitive clicking for me again. Was a mad rush as V1 had just been made so I wanted to get V2 on the same order to save a bit on postage..

I might see if I can get a few bits on the H5 revB tomorrow..fingers permitting..

Post by **exxos** » Fri Nov 27, 2020 2:16 pm

Preview of V2

: 1-min.PNG (1.4 MiB) Viewed 3341 times

Post by **exxos** » Mon Nov 30, 2020 10:34 pm

Another marpet.. those things get around more than dog sh*t

Spot the "install screw up".. no wonder the thing didn't boot up...

: IMG_5792.JPG (257.8 KiB) Viewed 3296 times

: IMG_5793.JPG (394.88 KiB) Viewed 3296 times

: IMG_5794.JPG (407.31 KiB) Viewed 3296 times

Cosmic Puppet · Post by **Cosmic Puppet** » Mon Nov 30, 2020 10:49 pm

Is it being shorted out on the RF shield?

DoG · Post by **DoG** » Mon Nov 30, 2020 10:58 pm

Cosmic Puppet wrote: ↑Mon Nov 30, 2020 10:49 pm Is it being shorted out on the RF shield?

Nope. The shifter is not socketed so the marpet was not fully installed.

Post by **exxos** » Mon Nov 30, 2020 11:02 pm

DoG wrote: ↑Mon Nov 30, 2020 10:58 pm
Cosmic Puppet wrote: ↑Mon Nov 30, 2020 10:49 pm Is it being shorted out on the RF shield?
Nope. The shifter is not socketed so the marpet was not fully installed.

Thing is, it was actually "fitted" ontop of the shifter... I guess whoever fitted it didn't fully understand the whole "plug and play" thing there

Cosmic Puppet · Post by **Cosmic Puppet** » Mon Nov 30, 2020 11:20 pm

"don't read the instructions and play"

DoG · Post by **DoG** » Mon Nov 30, 2020 11:22 pm

exxos wrote: ↑Mon Nov 30, 2020 11:02 pm
DoG wrote: ↑Mon Nov 30, 2020 10:58 pm

Nope. The shifter is not socketed so the marpet was not fully installed.
Thing is, it was actually "fitted" ontop of the shifter... I guess whoever fitted it didn't fully understand the whole "plug and play" thing there

Yup, that is one way of doing it I guess. Not really "future proof" though.

exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on

Re: exxos blog - random goings on