TF536 Firmare Update RC3
Moderators: terriblefire, Terriblefire Moderator
-
- Posts: 11
- Joined: Sun Jun 21, 2020 11:11 am
Re: TF536 Firmare Update RC3
Hello, after this update, I have no more bugs. Thanks for this work. Everything is perfect...
Re: TF536 Firmare Update RC3
Has anyone (other than GadgetUK) got SCSI cards to work with TF536 after the RC3 firmware update?
- Gleylancer
- Posts: 8
- Joined: Fri Jun 11, 2021 8:25 pm
Re: TF536 Firmare Update RC3
Is this the only way of updating the TF536? I'm baffled by the sheer amount of hardware and effort that's needed to do this. O.oobitus1990 wrote: ↑Fri Apr 02, 2021 3:28 amI found this to be very helpful:Seb132 wrote: ↑Fri Apr 02, 2021 2:46 am Is there a post for Newbies with a "how-to" tutorial explaining how to flash a TF on general and a TF536 in particular ?
I'm in Australia and never done this before...
Also is there a sticky post for all the latest firmwares of all TF cards ?
I have a TF330 also and I'm not sure what is the latest firmware for it and if I have it...
Thank you.
https://linuxjedi.co.uk/2020/12/01/prog ... pberry-pi/
-
- Moderator Team
- Posts: 5387
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 Firmare Update RC3
Baffled why? Thats the cheapest way to do it. You can buy an expensive XIlinx programmer as an alternative.Gleylancer wrote: ↑Fri Jun 11, 2021 8:27 pm Is this the only way of updating the TF536? I'm baffled by the sheer amount of hardware and effort that's needed to do this. O.o
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF536 Firmare Update RC3
It's really not that expensive, $30 on ebay.terriblefire wrote: ↑Fri Jun 11, 2021 8:33 pmBaffled why? Thats the cheapest way to do it. You can buy an expensive XIlinx programmer as an alternative.Gleylancer wrote: ↑Fri Jun 11, 2021 8:27 pm Is this the only way of updating the TF536? I'm baffled by the sheer amount of hardware and effort that's needed to do this. O.o
- Gleylancer
- Posts: 8
- Joined: Fri Jun 11, 2021 8:25 pm
Re: TF536 Firmare Update RC3
As a naive and highly inexperienced amiga newbie, I was probably expecting to just do it from one of the internal storage options, but I suppose that's not possible.
- Gleylancer
- Posts: 8
- Joined: Fri Jun 11, 2021 8:25 pm
Re: TF536 Firmare Update RC3
That looks like a much easier way, I'll just get one of those. Thank you.It's really not that expensive, $30 on ebay.
Re: TF536 Firmare Update RC3
Please be aware that you will most likely need a 32 bit windows to run the Xilinx ISE (14.1) and the programmer drivers. Even if you have an old WinXP machine it will be fine.Gleylancer wrote: ↑Fri Jun 11, 2021 8:52 pm
That looks like a much easier way, I'll just get one of those. Thank you.
Re: TF536 Firmare Update RC3
There's a workaround to get it to work on 64bit win10, couple of files to replace. Details on here -> https://alchitry.com/pages/installing-isealenppc wrote: ↑Fri Jun 11, 2021 9:06 pmPlease be aware that you will most likely need a 32 bit windows to run the Xilinx ISE (14.1) and the programmer drivers. Even if you have an old WinXP machine it will be fine.Gleylancer wrote: ↑Fri Jun 11, 2021 8:52 pm
That looks like a much easier way, I'll just get one of those. Thank you.